Availability: In stock
Filtre magnétique Skid Automag
The Automag Skid magnetic filtration system is a self-contained filtration and fluid recovery system. The fully automated unit minimises fluid loss during cleaning and is ideal for 24/7 high volume single or multi-cell machining applications.
A patented Automag self-purging magnetic filter removes magnetic and para-magnetic contamination, down to sub-micron size, from coolants and lubricants. The filter holds the contamination until it is released during the automated ‘purge’ process.
- Unique Dual Flow Technology TM - maximises collection capability
- No user intervention required
- Suitable for harsh chemical environments
- PLC compatible
- Ultra-fast automated cleaning
- No reduction in pressure or flow
- Rapid return on investment
- Built in fluid recovery system
- Flow rates of up to 400 Gallons per minute
- Get rid of scrapping costs
- Extend the life of your fluids
- Extend the life of other filters
- Increases the accuracy of parts
- Improves the finishing of parts
- Reduce machine wear
Contamination fluid enters the inlet port where it is dispersed into the first filtration chamber. The fluid passes around the high-intensity ‘rare-earth’ magnetic cores where contamination particles are removed. The fluid is slowed and enters the second filtration chamber where it receives further filtration.
Contamination remains attached to the stainless steel sleeves of the cores. The filtered fluid exists through the outlet port.
The purging process is fully automated, The cores are raised from the sleeves and the purge valve is switched. Fluid is pumped through the filter, washing the contamination from the stainless steel sleeves and carrying it into the buffer tank.
The fluid is then slowed and passed onto the coolant roller. This purged fluid is highly contaminated. The flow rate and high magnetic strength of the roller ensures that contamination removal is extremely efficient.The clean fluid is then re-circulated; the contamination is scraped from the roller and collected for disposal or recycling.
The contaminants are captured on the tube of the nuclei. The cleaned liquid is reintegrated into the process.
Cleaning and waste
Cleaning cycle: The magnetic cores are removed from the tubes and the drain valve is actuated. Contaminants are collected and cleaned in the buffer tank.
Recovery of the fluid
Contaminated liquid leaves the buffer tank to pass over the magnetic drum. Contaminants are attracted to the rotating drum magnet, leaving the clean liquid to allow recirculation. Contaminants are removed from the separator by a scraper, ready for collection.
Self-contained liquid recovery system for high contamination applications. Automated operations 24 hours a day, 7 days a week.
- Filtration on / off
- Pneumatic automatic and autocleaning
- Magnetic drum for the complete recovery of the liquid used in the cleaning process (filter)
- Time range: 41 ° F / 5 to 158 ° C / 70 ° C (filter).
|Automag filtration unit||Core ammount||Flow||Contamination Capacity lb / kg||Max. Operating Pressure psi / bar|
|US gallons / min||l / min|
|AMC||8||52||200||5 / 2.5||145 / 10|
|AM6||6||118||450||15 / 7||145 / 10|
|AM12||12||237||900||30 / 14||145 / 10|
|AMCS1||35 / 900||35 / 900||67 / 1700||2 / 50||1½ / 38||1½ / 38||ANSI|
|AM6S1||38 / 1000||47 / 1200||57 / 1300||3 / 75||2 / 50||2 / 50||ANSI|
|AM12S1||47 / 1200||51 / 1400||74 / 1400||3 / 75||3 / 75||3 / 75||ANSI|