Liquid Filtration

Sump Shark Filters

CECOR's patented Sump Shark Filter design based on filter pore size removes the chips, swarf and other residue from the fluids.
Sump Shark Filters - Liquid Filtration - Sump Shark by Cecor

Availability: In stock

$0.00
The Montfort Benefits

A multidisciplinary team to accompany you in your projects.
They move to your factory, to your workshop, and effectively meet your needs for improvement; from development to installation.

Unrivaled quality and a customized product
We stand out from the competition by meeting your specific needs with equipment and tools notorious for their reliability and excellent value for money.

A remarkable After-Sales Support
The team of Montfort technicians support all our divisions by installing, maintaining and guaranteeing our equipment.

Share...
Product Description
Details

Sump Shark Filters

Understanding sump cleaner filtering

An important function of sump cleaning is the ability to remove solids from industrial fluids: coolant, metalworking fluids, cutting fluids, etc during the pump in operation. As our Sump Shark® sump cleaners suctions out fluids and solids, CECOR’s patented filter system removes the chips, swarf and other residue from the fluids.

When evaluating different manufacturers’ sump cleaners and filtering, be sure to compare apples to apples. Effective filtering is a complex process. Just shopping the “lowest micron filter” is not the right strategy. Too fine of a filter in the wrong application can reduce pumping flow, and could stop flow altogether.

Most manufacturers use a nominal rating to measure a filter’s efficiency, which indicates the removal of a certain percentage of particles of a certain micron size (i.e. 60% of 25 micron particles). If percentage & particle size are not presented together then the nominal rating is meaningless.

CECOR has innovated an effective filter that is based on filter pore size (absolute rating). Our filter system can actually filter particles much smaller due to the “cake”. The “cake” builds up on the filter as dirty coolant passes through the it. The “cake” makes the filter more efficient allowing it to trap even finer particles. Therefore, depending on your application, our absolute 99% efficient 500 micron bag could also be 80% efficient removing 20 micron particles, thus also being considered a nominal 20 micron filter.

CECOR filters “take the cake;”

CECOR’s patented reverse-taper design eliminates bridging. The filter empties completely. Solids do not become trapped in the filter. CECOR’s unique filter pack design provides a continuous filter medium. All of the fluids must pass through the filter with none escaping through slits or openings.

Other design advantages include a built-in lifting bail, a filter lid that retains the filter, and thick ½” (12.7 mm) gaskets enclosing the filter. CECOR’s filter consists of a metal assembly with a perforated basket that holds the filter bag/sleeve. The filter bags and sleeves are available in a variety of sizes, materials and weaves to suit your application.

CECOR’s filter will empty completely at dumping time. Our patented reverse-taper design eliminates bridging. Bridging is when solids get trapped in the filter so it will not empty properly. Many chips are either heavy, sharp or both. If bridging occurs there could easily be a potential hazard when you employee tries to break the bridge to get the chips to drop out of the bottom of the filter.

Additional Information
Technical Specifications

Sump Shark Filters details

F10 Filter

The F10 filter has a capacity of 1 cubic foot in the strainer basket with dimensions of 15-1/2″ long and 14″ diameter. The F10 filter is standard on the following series: SA5, SE10, CA5 and CE10.

Capacity : 0,03 m³

F10 Filter
Poly Medium Weave

Poly Medium Weavebr>

Fine Cotton

Fine Cotton

Coarse Burlap

Coarse Burlap


F23 Filter

The F23 filter has 2.3 cu. ft. capacity with a top dimensions of 9-1/2″ and 13-3/8″ at the bottom. The greater bottom dimension is due to our safety features; the CECOR patented compound linkage & rotary latch allows you to safely dump the filter from the bottom. The F23 filter is fitted for fork lift or hook hoist handling.

Capacity : 0,06 m³

F23 Filter
Poly Regular Weave Sleeve

Poly Regular Weave Sleeve

Poly Fine Weave Sleeve

Poly Fine Weave Sleeve

Course Burlap Sleeve

Course Burlap Sleeve


F50 Filter

The F50 filter has 5.0 cubic foot capacity and dimensions of 16-3/8″ at the top and 20-3/8″ at the bottom. The greater bottom dimension is due to our safety features; the CECOR patented compound linkage & rotary latch allows you to safely dump the filter from the bottom. The F50 filter has a perforated metal outer basket and the fork lift handle is an integral to the two-piece cover.

Capacity : 0,14 m³

F50 Filter
Poly Regular Weave

Poly Regular Weavebr>

Poly Fine Weave

Poly Fine Weave

Coarse Burlap

Coarse Burlap