SW 453 PLUG
Availability: In stock
SW 453 PLUG
Double head mitre saw with a fixed unit on the left and the other one movable.
- Automatic positioning of the movable unit.
- Pneumatic tilting of the heads (90°, 45° or 22,5°).
- The intermediate degrees can be obtainedby manually setting mechanical stops.
- Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm with accessories).
- It is equipped with the system EC 609.
- No. 2 TCT Sawblades (Ø 450 / Ø 500 mm).
- Cutting deepth stop device.
- Pair of horizontal pneumatic clamps.
- Pair of vertical pneumatic clamps.
- Mobile roller conveyor with pneumatic clamp for section support.
- Compressed air treatment unit (filter/reducer/lubricator)
- Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality.
- Frontal and straight blade feed with speed adjustments.
- Hydro-pneumatic blade feed.
- Wide cutting capacity by means of sawblades Ø 450 mm.
- Possibility to use a blade with a dia. 500 mm, only by eplacing the tool.
- Dynamic protection guards for a total covering of the cutting area.
- Mist spray lubrication tools (Venturi system).
- Pre-arranged to connect an exhaust extractor for swarfs.
- Pre-arranged to use a set of tanks to collect swarfs.
- Pre-arranged to connect a motorised belt conveyor.
EC 609 Software
Positioning system with graphic LCD display, which is able to:
- manage single cuts
- memorize up to 200 profile codes and their values
- manage up to 80 frames style, each one including up to 30 rows of programming
- manage the calibration cycle automatically
- manage a linear correction factor into defined zones
- memorize cutting list already calculated by USB key
- manage a label printer
- manage software for automatic cut-off
- manage software expanding capacity of cutting length.
|Angles preselected of positioning of the cutting devices, outwards||°||90 - 45 - 22,5|
|Diametre of the sawblade||mm||450/500|
|Speed of the rotating tool||rpm||2800|
|Maximum useful cutting length||mm||4000 / 5000 / 6000|
|Tolerance in the positioning repeatability||mm||± 0,1|
|Installed electric power||kW||5,2|
|Power of the motor||kW||2,2|
|Pneumatic operating pressure||bar||7|
|Height of the machine||mm||± 1600|
|Width of the machine||mm||± 1200|
|Length of the machine , 4m. Useful cutting length||mm||± 5500|
|Length of the machine , 5m. Useful cutting length||mm||± 6500|
|Length of the machine , 6m. Useful cutting length||mm||± 7500|
|Weight of the machine , 4m. Useful cutting length||kg||± 1600|
|Weight of the machine , 5m. Useful cutting length||kg||± 1700|
|Weight of the machine , 6m. Useful cutting length||kg||± 1800|