Print this page

Amada SA1318WPC Automatic Miter Bandsawing Machine

The heavy-duty Amada SA1318WPC is a hydraulic and automatic 5 H.P. horizontal miter bandsawing machine with a 1-1/4″ blade perfect for metal cutting.

Features

  • Hydraulic Down Feed : Feed rate and down pressure can be controlled forfast, accurate cutting. Setup is made easy through the color-coded dial allowing theoperator to select the optimum setting for the type of material being cut. Bothsettings are made at the operator’s station.
  • Hydraulic Shuttle Feed : Length settings of 0-27.56” (0-700mm) areaccomplished with simple programming at the operator’s touch screen. The shuttlecomes to positive stops at both ends of the index, assuring cutoff length accuracy,reducing material loss. Repeatability is + .005” per index.
  • PC Programmable Control : Conveniently located on the operator’scontrol panel, this touch screen control allows the operator to program and store upto ten jobs. Inputs include Part Length from 0-999.999” and the Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen but is not stored in memory. The Automatic Piece Counter stops each job when the pre-setnumber of cuts has been made.
  • Out-of-Stock Switch : The machine will shut off automatically when the material is no longer present in the rear vise jaws, allowing for truly automatic operation.
  • Full Stroking Hydraulic Vise Jaws : Hydraulic vices hold the workpiece, providing accurate cuts and longer blade life.
  • Shuttle Vise : The shuttle vise jaw floats hydraulically to accommodate crookedstock assuring straight, accurate cuts. The remnant length is 9.5” (241 mm).

Technical Specifications

Model SA1318WPC
Imperial Metric
Cutting Capacity Round (Diameter) at 90° 13″ 330 mm 13″
330 mm		 11.8″
300 mm		 7″
180 mm		 13″ x 16″
330 x 405 mm		 9.4″ x 13″
240 x 330 mm		 7″ x 11″
180 x 280 mm
Round (Diameter) at 45° 11.8″ 300 mm
Round (Diameter) at 60° 7″ 180 mm
Rectangle (W x H) at 90° 13″ x 16″ 330 x 405 mm
Rectangle (W x H) at 45° 9.4″ x 13″ 240 x 330 mm
Rectangle (W x H) at 60° 7″ x 11″ 180 x 280 mm
Work Load Capacity 4,400 lbs 1,996 kg
Saw Blade Blade Size (L x T x W) 16′-4″ x 0.043″ x 1.25″ 4960 x 1.1 x 34 mm 16′-4″ x 0.043″ x 1.25″
4960 x 1.1 x 34 mm		 108-344 ft./min, by Inverter
33-105 m/min, by Inverter		 Hydraulic
Blade Speed 108-344 ft./min, by Inverter 33-105 m/min, by Inverter
Tension Control Hydraulic
Blade Control Top Limit Setting Bow height adjusting plate Bow height adjusting plate Hydraulic Pressure & Flow Control Valve
Cutting Control Hydraulic Pressure & Flow Control Valve
Vise Operation Type Front and Rear Vises and Vertical Vise Front and Rear Vises and Vertical Vise Hydraulic Full-Stroke Cylinder
Control Hydraulic Full-Stroke Cylinder
Motors Saw Blade 5 HP 3.75 kW 5 HP
3.75 kW		 1 HP
0.7 kW		 0.13 HP
0.1 kW
Hydraulic Pump 1 HP 0.7 kW
Cutting Fluid Pump 0.13 HP 0.1 kW
Power Requirement Power Supply Voltage AC230V±10%, 3 PH, 60 Hz,
Voltage must be specified when ordering		 AC230V±10%, 3 PH, 60 Hz,
Voltage must be specified when ordering
Power Requirement
Cutting Fluid Tank Capacity 30.6 gal 116 liters
Hydraulic Tank Capacity 5.8 gal 22 liters 5.8 gal
22 liters		 400 psi
2.8 MPa (28 kgf/cm2)
Pressure Setting 400 psi 2.8 MPa (28 kgf/cm2)
Chip Disposal Chip Conveyor
Material Index Index Mechanism Shuttle Vise Shuttle Vise 27.6″
701 mm		 0″-393.7″
0-10000 mm		 1-10 9.25” for single part cutting - 17.13″ for bundle cutting
235 mm for single part cutting - 435 mm for bundle cutting
Stroke 27.6″ 701 mm
Length 0″-393.7″ 0-10000 mm
Number of Input Block 1-10
Number of Cut-Off Pieces
Remnant Length 9.25” for single part cutting
17.13″ for bundle cutting		 235 mm for single part cutting
435 mm for bundle cutting
Machine Dimensions (W x L x H) 93.1″ x 81.6″ x 64.4″ 2365 x 2072 x 1635 mm
Table Height (Above Floor) 34.5″ 876 mm
Machine Weight 4,414 lbs 2,002 kg
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com