Print this page
Amada WS2543M Automatic Miter Bandsawing Machine
The heavy-duty Amada WS2543M is a hydraulic and automatic 10 H.P. horizontal miter bandsawing machine with a 2” blade perfect for metal cutting.
Features
- Saw Frame : The saw frame is canted at a 6.5-degree angle for faster cutting of structural and other flat materials. The heavy-duty saw frame rides up and down a linear way guide system.
- Miter Cutting : The WS2543M model has a saw base that swivels to 45 degrees one direction and 60 degrees the other, for miter cutting. A ½ hp (400 W.) motor turns the machine base and the degree of angle is read out on a LED DISPLAY.
- Speed Range : 98-361 FPM (30-110m/min.). Infinitely variable through a frequency inverter system and a heavy-duty Worm Gear Transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An Electric Tachometer assures accurate speed settings.
- Hydraulic Down Feed : Feed rate and down pressure can be controlled for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut.
- Blade Guides : A combination of roller bearing and hydraulically actuated carbide blade guides assure the blade is held taut for fast, accurate cuts. The cast iron Movable Guide Arm is positioned through a Hydraulic Cylinder, then is Hydraulically Locked in position.
- Fast Approach : Work height is manually set allowing the head to raise just enough to clear the workpiece, reducing cycle time and allowing for faster cutting performance.
- Chip Brush : An Independent Motor drives the blade cleaning Chip Brush to assure complete removal of chips from each gullet of the blade, providing optimum cutting performance and enhanced blade life.
- Vise Jaw : Full Stroking Vise Jaw and a Vertical Clamp Device assure the workpiece is secure and eliminates excessive vibration during the cut providing better blade life and cleaner cuts. Minimum Clamping Capacity is 7.5” (190mm) width.
- Controls : An Independent Electric Cabinet and Control Panel allow the operator to position the controls for optimum viewing of the cutting area. A PLC controls all electrical and hydraulic functions.
Technical Specifications
| Specifications | Model | ||||
|---|---|---|---|---|---|
| WS2543M | W2543M | W2543A | |||
| Cutting Capacity | Round (Diameter) at 90° | 28″ (711 mm) | 28″ (711 mm) | ||
| Round (Diameter) at 45° | 28″ (711 mm) | ||||
| Round (Diameter) at 60° | 25.6″ (650 mm) | ||||
| Rectangle (W x H) 90° | 44″ x 27″ (1117.6 x 685.8 mm) | ||||
| Rectangle (W x H) at 45° | 25.6″ x 27″ (650 x 685.8 mm) | ||||
| Rectangle (W x H) at 60° | 15.7″ x 25.6″ (400 x 650 mm) | ||||
| Work Load Capacity | 11,020 lbs (4,998 kg) | ||||
| Saw Blade | Blade Size (L x T x W) | 28’6-1/2″ x 0.063″ x 2″ (8700 x 1.6 x 54 mm) | |||
| Blade Speed | 98-361 ft./min, by Inverter (30-110 m/min, by Inverter) | ||||
| Tension Control | Hydraulic | ||||
| Blade Control | Top Limit Setting () | Automatic Setting with Fast Approach Feeler | |||
| Cutting Control | Hydraulic Pressure & Flow Control Valve | ||||
| Vise Operation | Type | Split Vises and Vertical Clamp Device | |||
| Control | Hydraulic Full-Stroke Cylinder | ||||
|
Motors |
Saw Blade | 10 HP (7.5 kW) | |||
| Hydraulic Pump | 3 HP (2.2 kW) | ||||
| Cutting Fluid Pump | 1/4 HP (0.18 kW) | ||||
| Only WS2543M Roll Motor |
1.5 HP (1.1 kW) | ||||
| Only WS2543M Table Rotation |
1/2 HP (0.4 kW) | ||||
| Only W2543A Servo Feeding |
1.5 HP (0.18 kW) | ||||
| Power Requirement | Power Supply Voltage | AC230V±10%, 3 PH, 60 Hz - Voltage must be specified when ordering | |||
| Power Requirement | |||||
| Cutting Fluid | Tank Capacity | 47.5 gal (215 liters) | |||
| Hydraulic | Tank Capacity | 19.8 gal (90 liters) | 21 gal (95 liters) | ||
| Pressure Setting | 1067 psi (7.35 MPa (75 kgf/cm2)) | 996 psi (6.86 MPa (70 kgf/cm2)) | |||
| Chip Disposal | Chip Conveyor | ||||
| Material Index | Index Mechanism | Shuttle Vise | |||
| Stroke | 59″ (1500 mm) | ||||
| Length | 0″ – 393.6″ (0 – 9999 mm) | ||||
| Machine Dimensions (W x L x H) | 179″ x 89.4″ x 101″ (4550 x 2270 x 2560 mm) | 179″ x 89.4″ x 108.3″ (4550 x 2270 x 2750 mm) | |||
| Table Height | 32’ – 33 (810 – 850 mm) | ||||
| Machine Weight | 11,880 lbs (5,400 kg) | 9,500 lbs (4,300 kg) | 16,940 lbs (7,700 kg) | ||
| WS2543M | W2543M | W2543A | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model : WS2543M | Round (Diameter) at 90° 28″ (711 mm) Round (Diameter) at 45° Round (Diameter) at 60° Rectangle (W x H) 90° Rectangle (W x H) at 45° Rectangle (W x H) at 60° |
11,020 lbs (4,998 kg) | 28’6-1/2″ x 0.063″ x 2″ (8700 x 1.6 x 54 mm) | 98-361 ft./min, by Inverter (30-110 m/min, by Inverter) | Hydraulic | Automatic Setting with Fast Approach Feeler | Hydraulic Pressure & Flow Control Valve | Split Vises and Vertical Clamp Device | Hydraulic Full-Stroke Cylinder | 10 HP (7.5 kW) | 3 HP (2.2 kW) | 1/4 HP (0.18 kW) | 1.5 HP (1.1 kW) | 1/2 HP (0.4 kW) | AC230V±10%, 3 PH, 60 Hz - Voltage must be specified when ordering | 47.5 gal (215 liters) | 19.8 gal (90 liters) | 1067 psi (7.35 MPa (75 kgf/cm2)) | Chip Conveyor | 179″ x 89.4″ x 101″ (4550 x 2270 x 2560 mm) | 32’ – 33 (810 – 850 mm) | 11,880 lbs (5,400 kg) | |||
| Model : W2543M | Round (Diameter) at 90° 28″ (711 mm) Rectangle (W x H) 90° |
11,020 lbs (4,998 kg) | 28’6-1/2″ x 0.063″ x 2″ (8700 x 1.6 x 54 mm) | 98-361 ft./min, by Inverter (30-110 m/min, by Inverter) | Hydraulic | Automatic Setting with Fast Approach Feeler | Hydraulic Pressure & Flow Control Valve | Split Vises and Vertical Clamp Device | Hydraulic Full-Stroke Cylinder | 10 HP (7.5 kW) | 3 HP (2.2 kW) | 1/4 HP (0.18 kW) | AC230V±10%, 3 PH, 60 Hz - Voltage must be specified when ordering | 47.5 gal (215 liters) | 21 gal (95 liters) | 996 psi (6.86 MPa (70 kgf/cm2)) | Chip Conveyor | 179″ x 89.4″ x 101″ (4550 x 2270 x 2560 mm) | 32’ – 33 (810 – 850 mm) | 9,500 lbs (4,300 kg) | |||||
| Model : W2543A | Round (Diameter) at 90° 28″ (711 mm) Rectangle (W x H) 90° |
11,020 lbs (4,998 kg) | 28’6-1/2″ x 0.063″ x 2″ (8700 x 1.6 x 54 mm) | 98-361 ft./min, by Inverter (30-110 m/min, by Inverter) | Hydraulic | Automatic Setting with Fast Approach Feeler | Hydraulic Pressure & Flow Control Valve | Split Vises and Vertical Clamp Device | Hydraulic Full-Stroke Cylinder | 10 HP (7.5 kW) | 3 HP (2.2 kW) | 1/4 HP (0.18 kW) | 1.5 HP (0.18 kW) | AC230V±10%, 3 PH, 60 Hz - Voltage must be specified when ordering | 47.5 gal (215 liters) | 21 gal (95 liters) | 996 psi (6.86 MPa (70 kgf/cm2)) | Chip Conveyor | Shuttle Vise | 59″ (1500 mm) | 0″ – 393.6″ (0 – 9999 mm) | 179″ x 89.4″ x 108.3″ (4550 x 2270 x 2750 mm) | 32’ – 33 (810 – 850 mm) | 16,940 lbs (7,700 kg) |
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com