Print this page

USED - IDEAL BAS 065-11 Flash Butt Welding Machine for Bandsaw Blades

IDEAL BAS 065-11 flash butt welding machine for handling bandsaw blades strips from 10 to 60 mm (0,39" to 2 3/8") for carbone blades and up to 2inch for bi-metal. Hydraulic jaw clamping control by feet pedals.

Manufacturer Number : 224416.
Manufacturing year : 1998.
Nominal capacity (50% DC) : 20 kVA. Primary voltage : 230 V. Connection power : 20 kVA. Open-circuit voltage : 25 - 40 V. Nominal frequency : 50-60 Hz. Upset pressure : 5 kN.

USED. (we could perform welding in direct by video)
Delivery everywhere in the world available at extra charge.
Visa / Mastercard accepted.

10 000 $ USD

Type BAS 065 Flash Butt Welding Machine for Handling Strips of Up to 60 mm

  • Flash butt welding stands out with even heat distribution, the formation of a protective atmosphere, and the avoidance of dirt in the weld, and as such guarantees a high-quality welded joint.
  • The BAS 065 series of machines is equipped with ground electrodes for water cooling. In this manner, very high production outputs can be ensured.
  • All BAS 065 type machines are already fitted with the IDEAL electronic annealing function (EG) as standard.
  • The EG electronic annealing function allows the continuous adjustment of the annealing voltage and annealing time of the convenient treatment of the weld and increased process security.
  • An adjustable jaw gap and the automatic pressure release of the weld during the annealing process guarantees an optimum annealing result
  • The BAS 065-11 is designed for handling strips of 10 to 60 mm (0,39" to 2 3/8")

Model Details

  • Model BAS 065-11
  • Manufacturer Number : 224416
  • Manufacturing year : 1998
  • Nominal capacity (50% DC) : 20 kVA
  • Primary voltage : 230 V
  • Connection power : 20 kVA
  • Open-circuit voltage : 25 - 40 V
  • Nominal frequency : 50-60 Hz
  • Upset pressure : 5 kN

Flash Butt Welding Machine

Type BAS IDEAL flash butt welding machines are designed for the efficient joining of saw bands, band knives and steel strip. Their strengths lie in precise, heavy-duty butt welding that can be reproduced in high quality. Emphasis was on the operator when designing the machine, with simple, ergonomic operation in mind.

The compact and robust design of the machine with its intuitive operation is aimed not only at industrial use in wood- and metal-processing operations, but also in mobile repairs. Used around the world, IDEAL BAS flash butt welding machines have been proving their quality and reliability on a day-to-day basis … and have been doing so for decades.

The Benefits of the Welding Machines for Saw Bands, Band Knives and Steel Strip

  • No addition of solder, flux or other additional materials
  • Machine housings of a robust design for durability in a challenging production environment
  • Perfectly aligned welds, free of offset by using highly accurate wear-free guides
  • Uniform, high degree of distribution of pressure without the part slipping during the welding process by means of adjustable hydraulic clamping devices
  • Quick-changing electrode inserts and pressure fittings for short setup times
  • Electronic components arranged in either machine housing or separate cabinet for optimum protection against dirt and damage
  • Upset welding by means of an either mechanically or pneumatically pre-tensed spring system for exactly the same welding results
  • Either sensitive or, as may apply, continuous adjustment of the upset force and path for optimum welding results
  • Automatic control of the welding process for precisely repeatable welding results
  • Precise multi-stage adjustment of the welding voltage for optimum process parameters

Technical Specifications

Model BAS 065
Clamping system Clamping Device Hydraulic Hydraulic 5,0 kN
1124 lbf		 60 mm
2 3/8"		 0,4 - 2,5 mm
0,016" – 0,100"
Upset pressure 5,0 kN
1124 lbf
Clamping width 60 mm
2 3/8"
Thickness range 0,4 - 2,5 mm
0,016" – 0,100"
Welding range Wood cutting band saws 10 x 0,7 - 60 x 1,0 mm
3/8" x 0,028" - 2 3/8" x 0,042"		 10 x 0,7 - 60 x 1,0 mm
3/8" x 0,028" - 2 3/8" x 0,042"		 10 x 0,7 - 54 x 1,6 mm
3/8" x 0,028" - 2" x 0,063"		 10 x 0,4 - 35 x 0,8 mm
3/8" x 0,016" - 1 1/4" x 0,032"		 10 x 0,4 - 40 x 0,8 mm
3/8" x 0,016" - 1 1/2" x 0,032"		 100 mm²
0,155 SQ IN		 50 mm²
0,078 SQ IN
Bimetal and Tungsten alloyed Saw Bands 10 x 0,7 - 54 x 1,6 mm
3/8" x 0,028" - 2" x 0,063"
Stainless Steel Saw Bands, e.g. for food applications 10 x 0,4 - 35 x 0,8 mm
3/8" x 0,016" - 1 1/4" x 0,032"
Band Knives, e.g. for leather and foam 10 x 0,4 - 40 x 0,8 mm
3/8" x 0,016" - 1 1/2" x 0,032"
S235J (St37-2) Steel Strips 100 mm²
0,155 SQ IN
Stainless Steel Strips X5CrNi18-10 (1.4301) 50 mm²
0,078 SQ IN
Performance Nominal capacity (50% DC) 20 kVA 20 kVA 4 steps
Secondary voltage 4 steps
Dimensions (W x D x H) 950 x 700 x 800 mm
37,4" x 27,6" x 31,5"
Weight 290 kg
640 lbs
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com