Print this page

Amada DYNASAW 430 High Performance Horizontal Post Style Bandsawing Machine

The Amada DYNASAW 430 is an automatic high performance CNC column style bandsawing machine. This 7.5 HP sawing machine comes with a 1-1/2″ Blade, non-contact material positioning and a smart blade change feature.

Features

  • Dynamic Frame : A highly rigid frame that incorporates a newly engineered dual post system
  • New CNC Control : Very easy to use and greatly reduces setup time. Three different cutting modes for maximum efficiency: “Eco-mode”, “Standard-mode”, and “Power mode”.
  • Double Vibration Dampening Rollers : Double rollers reduce vibration resulting in faster and quieter cutting while improving blade life.
  • New Saw Blade Frame Design : Longer blade life by reducing the twist in the blade, fatigue is greatly reduced leading to longer blade life.
  • Automatically Adjusting Wire Brush
  • Open Top, Longer Feed Stroke Vise
  • Non-Contact Material Positioning
  • Smart Blade Change Feature
  • Chip Flusher to Facilitate Machine Up Time
  • Burr Removal Through Uniquely Designed Table
  • Auto Trim Function Using a Laser to Detect Material Position

Advanced Cutting Technology at an Affordable Price

AMADA‘s newly developed concept enables this fully automatic bandsaw machine to set new standards in cost-efficiency and tool life. The sturdy, column-guided construction of the DYNASAW 430, in conjunction with the use of AMADA bi-metal or carbide-tipped bandsaw blades, results in optimum cutting results and extended tool life.

  • CNC-Control
  • Automatic table cleaning
  • Wire brush bar in the table reducing the burr at the cutted piece
  • 35 mm remnant piece length
  • Automatic wire brush
  • 700 mm feed length per stroke
  • Automatic loading function
  • Automatic blade guide arm positioning

Spécifications techniques

Model DYNASAW430
Imperial Metric
Cutting Capacity Round (Diameter) 1.18″ – 16.93″ 30-430 mm 1.18″ – 16.93″
30-430 mm		 1.18″ x 1.18″ – 16.93″ x 16.93″
30 x 30 – 430 x 430 mm
Rectangle (W x H) 1.18″ x 1.18″ – 16.93″ x 16.93″ 30 x 30 – 430 x 430 mm
Work Load Capacity 6,613 lbs 3,000 kg
Saw Blade Blade Size (L x T x W) 17’5″ x 0.050″ x 1-1/2″ 5300 x 1.3 x 41mm 17’5″ x 0.050″ x 1-1/2″
5300 x 1.3 x 41mm		 49-394 ft/min by Inverter
15-120 m/min by Inverter		 Hydraulic
Blade Speed 49-394 ft/min by Inverter 15-120 m/min by Inverter
Tension Control Hydraulic
Blade Control Top Limit Setting Automatic Setting with Quick Approach Feeler Automatic Setting with Quick Approach Feeler CNC Control, Hydraulic Flow Control Valve with Stepping Motor
Cutting Control CNC Control, Hydraulic Flow Control Valve with Stepping Motor
Vise Operation Type Front, Main, Rear Vises Front, Main, Rear Vises Hydraulic Full-Stroke Cylinder
Control Hydraulic Full-Stroke Cylinder

Motors

 Saw Blade 7.5 HP 5.5 kW 7.5 HP
5.5 kW		 2 HP
1.5 kW		 1/8 HP
0.09 kW		 1/4 HP
0.18 kW
Hydraulic Pump 2 HP 1.5 kW
Wire Brush 1/8 HP 0.09 kW
Cutting Fluid Pump 1/4 HP 0.18 kW
Power Requirement Power Supply Voltage AC220V±10%, 3 PH, 60 Hz All Other Voltages Require Transformer AC220V±10%, 3 PH, 60 Hz All Other Voltages Require Transformer 13 kVA
Power Requirement 13 kVA
Cutting Fluid Tank Capacity 33 gal 125 liters 33 gal
125 liters		 Centrifugal Electric 2.6 gal/min
10 L/min
Pump Type Centrifugal Electric
Pump Capacity 2.6 gal/min 10 L/min
Hydraulic Tank Capacity 5.3 gal 20 liters 5.3 gal
20 liters		 Vane Pump 508 psi
3.5 MPa (35 kgf/cm2)
Pump Type Vane Pump
Pressure Setting 508 psi 3.5 MPa (35 kgf/cm2)
Chip Disposal Automatic Hydraulic Screw-Type Chip Conveyor
Material Index Index Mechanism Shuttle Vise Shuttle Vise 27.559″
700 mm		 0.394″ – 99.999″
10-9999.9 mm		 1-99 / 1-30 1-9999 1.38″ Plus Length of Parts
35 mm Plus Length of Parts
Stroke 27.559″ 700 mm
Length 0.394″ – 99.999″ 10-9999.9 mm
Number of Input Block/Station 1-99 / 1-30
Number of Cut-Off Pieces 1-9999
Remnant Length 1.38″ Plus Length of Parts 35 mm Plus Length of Parts
Machine Dimensions (W x L x H) Head-Up Position 99.2″ x 85.8″ x 79.5″ 2520 x 2180 x 2020 mm 99.2″ x 85.8″ x 79.5″
2520 x 2180 x 2020 mm		 99.2″ x 85.8″ x 79.5″
2520x 2180 x 2020mm
Head Down Position 99.2″ x 85.8″ x 79.5″ 2520x 2180 x 2020mm
Table Height 27.6″ 700 mm
Machine Weight 7718 lbs 3500 kg
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com