Amada HFA260P (PA260MPC) Automatic Horizontal Double Column Style Bandsawing Machine
Features
- Split Front Vise
- Vibration dampening rollers
- CNC controlled down feed
- Hydraulic blade tensioning
- HMI Touch Screen Control
- Bi-Directional Shuttle Vise
- Robust Rigid Dual Column Design
- Automatic Height Selection with Fast Approach
Speed Range
Infinitely variable through a frequency inverter drive and heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. A read out at the operator’s touch screen assures accurate speed setting.
Blade Guide
The hydraulic clamping and combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of + .002 per inch (.051 mm) of cut material. Large anti-vibration rollers help to increase blade life.
Hydraulic Shuttle Feed
Multi length shuttle indexing up to 999". The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy. Repeatability is + .005" per index. The shuttle vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts.
Hydraulic Down Feed
Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut.
MPC Programmable Control
Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to 100 jobs. Inputs include Part Length from 0 to 999” (0-25 m) (in inches up to 3 decimal places) and Number of Pieces to be cut.
Full Stroking Hydraulic Vise Jaws
The front vise jaws are split to reduce the remnant. The split vise jaws also help to reduce burrs left on the material and are ideal for bundle cutting, and holding the workpiece.
Automatic Chip Removal
The chip auger rotating in the coolant return removes chips quickly and efficiently, freeing the operator to perform more productive operations.
Variable Vise Pressure
Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material, allowing the piece to be held securely and without distortion.
Blade Deviation Monitor
The NC controller constantly monitors the cutting and blade conditions, including the twist of the saw blade. If these exceed the preset parameters in the automatic blade run-out detector the machine will cease cutting and indicate the reason for stopping.
User-Friendly Operator Console
By simplifying required input data, the cutting rate controller (CNC Light) makes achieving maximum cutting rates, accuracies, and longer blade life a constant.
Technical Specifications
| Model | HFA260P | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Imperial | Metric | ||||||||||
| Cutting Capacity | Round (Diameter) | 10″ | 250 mm | 10″ 250 mm |
10″ x 10.25″ 250 x 260 mm |
||||||
| Rectangle (W x H) | 10″ x 10.25″ | 250 x 260 mm | |||||||||
| Saw Blade | Blade Size (L x T x W) | 12′-11″ x 1.34″ x 0.043 | 3920 x 34 x 1.1 mm | 12′-11″ x 1.34″ x 0.043 3920 x 34 x 1.1 mm |
65 – 330 SFPM 20-100 m/min by Inverter |
Hydraulically Controlled | |||||
| Blade Speed | 65 – 330 SFPM | 20-100 m/min by Inverter | |||||||||
| Tension Control | Hydraulically Controlled | ||||||||||
| Power Requirements | Power Supply Voltage | AC230V +- 10%3PH, 60Hz, Required at factory voltage setting | AC230V +- 10%3PH, 60Hz, Required at factory voltage setting | @@ kVA | |||||||
| Cutting Fluid Pump | @@ kVA | ||||||||||
| Motors | Saw Blade | 5 HP | 3.7 kW | 5 HP 3.7 kW |
0.25 HP 0.75kW |
1.0 HP 0.75 kW |
|||||
| Cutting Fluid Pump | 0.25 HP | 0.75kW | |||||||||
| Hydraulic Pump | 1.0 HP | 0.75 kW | |||||||||
| Blade Control | Top Limit Setting | Automatic Setting with Fast Approach Feeler | Automatic Setting with Fast Approach Feeler | Hydraulic Pressure & Flow Control Valve | |||||||
| Cutting Control | Hydraulic Pressure & Flow Control Valve | ||||||||||
| Fluid Capacities | Coolant | 22.5 gal | 85 liters | 22.5 gal 85 liters |
23.8 gal 90 liters |
427 psi 3.0 MPa (30 kgf/cm) |
|||||
| Hydraulic Fluid | 23.8 gal | 90 liters | |||||||||
| Hydraulic Pressure Setting | 427 psi | 3.0 MPa (30 kgf/cm) | |||||||||
| Pressure Settings | Hydraulic | 427 PSI | 30kg/cm | 427 PSI 30kg/cm |
30,000 – 32,000 – |
171 – 213 PSI 12 – 15 kg/cm2 |
|||||
| Blade Tension | 30,000 – 32,000 | – | |||||||||
| Gauge Pressure | 171 – 213 PSI | 12 – 15 kg/cm2 | |||||||||
| Material Index | Index Mechanism | Shuttle Vise | Shuttle Vise | 19.7″ 500 mm |
0.39″ – 999″ 10 – 25000 mm |
1-100 | 1-20 | 1-999 | 2.75″ plus length of parts 70 mm plus length of parts |
||
| Stroke | 19.7″ | 500 mm | |||||||||
| Length | 0.39″ – 999″ | 10 – 25000 mm | |||||||||
| # of Input Block | 1-100 | ||||||||||
| # of Input Station | 1-20 | ||||||||||
| # of Cut-Off Pieces | 1-999 | ||||||||||
| Remnant Length | 2.75″ plus length of parts | 70 mm plus length of parts | |||||||||
| Fluid Capacities | Coolant | 22.5 gal | 85 liters | 22.5 gal 85 liters |
23.8 gal 90 liters |
427 psi 3.0 MPa (30 kgf/cm) |
|||||
| Hydraulic Fluid | 23.8 gal | 90 liters | |||||||||
| Hydraulic Pressure Setting | 427 psi | 3.0 MPa (30 kgf/cm) | |||||||||
| Machine Dimensions(W x L x H) | Head Up Position | 86.9″ x 81.3″ x 57.7″ | 2207 x 2065 x 1465 mm | 86.9″ x 81.3″ x 57.7″ 2207 x 2065 x 1465 mm |
86.9″ x 81.3″ x 57.7″ 2207 x 2065 x 1465 mm |
||||||
| Head Down Position | 86.9″ x 81.3″ x 57.7″ | 2207 x 2065 x 1465 mm | |||||||||
| Chip Disposal | Chip Conveyor | ||||||||||
| Table Height | 26″ | 663 mm | |||||||||
| Machine Weight | 3860 lbs | 1750 kg | |||||||||
Montfort International
G1P 3T3, Canada