Rinaldi PAN 38L - 38LI Single-Head Manually-Operated Copy Router
Single-Head Manually-Operated Copy Router
Single-head manually-operated copy router on 3000 mm long base, with manually-moving unit and pneumatic locking. Automatic forward head drop with fast approach device. Quick pneumatic control tool change (optional). Possibility of working steel up to 2 mm with standard fittings; with specific accessory stainless steel up to 1.5 mm. Pneumatic tracer movement up to 5 adjustable positions permits quick and precise machine positioning. The clamp plane rotation system permits machining 3 sides of the profile section without releasing the clamps or 4 sides performing through operations. The rotary movement from 0° to 180° maintains the same axis; the figure produced on the first side at 0° is at the same height as that reproduced on the opposite side at 180°. This system permits increasing work speed and precision, using shorter tools, therefore reducing vibrations and noise. Work area front guard with pneumatic control.
Technical Specifications
| Three-phase power supply | 380/400-50/60 | Volt-Hz |
| Three-phase bit motor power (38L version) | 0.35/0.55 | kW |
| Spindle speed (40 38L) | 3500/12000 | tours/min. |
| Three-phase bit motor power (38LI version) | 1.1 | kW |
| Adjustable spindle speed (38LI version)) | 1000...12000 | rpm |
| X - Y - Z axis stroke | 2500-150-250 | mm |
| Clamp capacity (b x h) | 140 x 110 | mm |
| Clamp plane angle | 0/90/180 | ° |
| Max cutter diameter | 12 | mm |
| Tracer tip diameters | 5-8-10 | mm |
| Weight (version 38L-38LI) | 680 | kg |
Features
- Downward movement on ball-bearing bars and bushes
- Side movement on ball-bearing guides and runners
- 4 Horizontal and vertical pneumatic clamps with low-pressure device
- Pneumatic depth stop
- Longitudinal and transversal stops referred to metric rods
- Micro-mist pneumatic tool lubrication (emulsified oil)
- Impulse tool lubrication (neat oil) (38LI version)
- Tracer point level with 3-diameter tool
- Downward movement controlled by buttons on grips
- Button for locking the spindle during tool change
- PVC clamp jaws adjustable without using spanners
- Adjustment of hydraulic head downward movement speed
- Pneumatic tracer movement
- 2 speeds spindle motor (38L version)
- Inverter-controlled spindle motor (38LI version)
- LED digital display screen for showing the tool rotation speed (38LI version)
Standard Accessories
- Service spanner bag, operator’s and maintenance manual with EC declaration
- Single-blade HSS cutter Ø5L=68 mm
- Single-blade HSS cutter Ø10 L=95 mm
- Collet ER20 Ø 6...5, 8...7 and Ø 10 ... 9 mm
- Hexagonal ring nut ER20 (38L version)
- Collet tool support ER20 + hexagonal ring nut (collet not included) (38LI version)
- 6 Carriage stops (fitted)
- Template with standard figures
- Template with figures for lock (fitted)
- Template with figures for hinges
- Template with figures for cremone bolts hole centre distances 21.5 mm
- 2 disengageable stops
- Adjustable levelling feet (fitted)
- Air blowing gun for cleaning (fitted)
Options
- Template without figures
- Impulse tool lubrication (neat oil)
- Tool cooled at -10°C for machining stainless steel (38LI version)
- Disengageable stop
- Collet tool support ER20 + hexagonal ring nut (collet not included) (38LI version)
- WELDON tool holder Ø6 mm (38LI version)
- WELDON tool holder Ø 28 mm (38LI version)
- WELDON tool holder Ø10 mm (38LI version)
- Carriage stop
- 5 cross positions stop
- Template with figures to specifications
Montfort International
G1P 3T3, Canada