Print this page

Erlo TCE Serie Round Column Drilling Machine with Automatic Feed

Round column drill with automatic feed, electromagnetic clutch, geared drive, transmission gears and displaceable table and fixed headstock. Drilling capacity: 40-50-60-70mm (1 37/64" - 1 49/64" - 2 23/64" - 2 3/4").

Round Column Drilling Machine with Electromagnetic Automatic Feed

Série TCE 40

  • Feed electromagnetic automatic
  • Transmission gears
  • Column diameter: 175 mm
  • Distance from spindle to column: 360 mm
  • Fixed table, moveable and rotating bit
  • Tiltable rotating table
  • Front wheel for sensitive fine feed
  • Drilling capacity: ⌀ 40 mm
  • Tapping capacity: M 33
  • Feed: 0,10-0,20-0,30-0,40
  • Spindle cone: CM 4
  • Engine power: 3 HP
  • Num. and selections of speeds: (9) 61 - 1169 rpm
  • Drilling depth: 200 mm
  • Weight: 610 kg
  • Cooling equipment
  • Light equipment

Série TCE 50

  • Feed electromagnetic automatic
  • Transmission gears
  • Column diameter: 200 mm
  • Distance from spindle to column: 400 mm
  • Fixed table, moveable and rotating bit
  • Tiltable rotating table
  • Front wheel for sensitive fine feed
  • Drilling capacity: ⌀ 50 mm
  • Tapping capacity: M 36
  • Feed: 0,10-0,20-0,30-0,40
  • Spindle cone: CM 4
  • Engine power: 4 HP
  • Num. and selections of speeds: (9) 54 - 1032 rpm
  • Drilling depth: 230 mm
  • Weight: 710 kg
  • Cooling equipment
  • Light equipment
  • Note: In case of constant raise and lower of the table’s height, the installation of the accessory Motorized Table MA is recommended.

Série TCE 60

  • Feed electromagnetic automatic
  • Transmission gears
  • Column diameter: 220 mm
  • Distance from spindle to column: 420 mm
  • Moveable table and fixed bit
  • Tiltable rotating table
  • Front wheel for sensitive fine feed
  • Drilling capacity: ⌀ 60 mm
  • Tapping capacity: M 42
  • Feed: 0,10-0,20-0,40-0,50-0,60
  • Spindle cone: CM 5
  • Engine power: 5,5 HP
  • Num. and selections of speeds: (12) 64 – 1210 rpm
  • Drilling depth: 260 mm
  • Weight: 820 kg
  • Cooling equipment
  • Light equipment

Série TCE 70

  • Feed electromagnetic automatic
  • Transmission gears
  • Column diameter: 220 mm
  • Distance from spindle to column: 420 mm
  • Fixed table, moveable and rotating bit
  • Tiltable rotating table
  • Front wheel for sensitive fine feed
  • Drilling capacity: ⌀ 70 mm
  • Tapping capacity: M 50
  • Feed: 0,10-0,20-0,30-0,40
  • Spindle cone: CM 5
  • Engine power: 7,5 HP
  • Num. and selections of speeds: (9) 51-966 rpm
  • Drilling depth: 260 mm
  • Weight: 840 kg
  • Cooling equipment
  • Light equipment

Équipement standard

  • Hardened and high quality steel gears
  • Speed plate and selecting levers on head
  • Gear box lubrication by automatic pumps
  • Machine base with coolant tank and pump
  • Worklight
  • Rotating and tilting table
  • Automatic feed and cut-off by electromagnetic clutch
  • Frontal wheel for fine sensitive feed
  • Depth scale and adjustable depth stop
  • Automatic tool ejector
  • Electric equipment integrated on machine’s head
  • Emergency stop push button
  • Spindle reversing switch
  • Safety drill guard with microswitch
  • CE marks

Équipement optionnel

  • Tapping system IR/RS
  • Tapping system IR/RS by pressing the buttons at handles
  • Automatic tapping system by lead screw with brake by variator
  • Automatic tapping system by lead screw with brake by variator and digital rpm reader
  • Reduced feeds (50% from standard range)
  • Column supplement 200 mm.
  • Speed electronic variator
  • Speed electronic variator and digital reader
  • Depth digital reader
  • Please inquiry for special motors
  • Rapid approach and return with pneumatic counterweight
  • Integral cycle with enconder
  • Integral cycle with encoder and automatic tapping system by lead screw with brake BY variator
  • Auxiliary command box (start-stop and emergency stop)
  • Start-Stop-Emergency control extension

Available Models

  • TCE.40
  • TCE.50
  • TCE.60
  • TCE.70

Technical Specifications

MODEL TCE.40 TCE.50 TCE.60 TCE.70
DRILLING CAPACITY IN STEEL OF 70 Kg 40 mm 50 mm 60 mm 70 mm
TAPPING CAPACITY IN STEEL OF 70 Kg. M33 M36 M42 M50
TRANSMISSION GEARS (Hardened and grounded) GEARS (Hardened and grounded) GEARS (Hardened and grounded) GEARS (Hardened and grounded)
SPEED NUMBER AND RANGE (WITHOUT VARIATOR) (9) 61-85-123-191-269-390-574-806-1169 rpm. (9) 54-75-109-169-237-344-507-712-1032-rpm. (12) 64-80-106-138-199-248-328-429-561-701-926-1210 rpm. (12) 51-64-84-110-158-198-262-342-447-559-738-966 rpm.
FEED AUTOMATIC AUTOMATIC AUTOMATIC AUTOMATIC
SPEED NUMBER AND RANGE (4) 0,10-0,20-0,30-0,40 (4) 0,10-0,20-0,30-0,40 (6) 0,1-0,2-0,3-0,4-0,5-0,6 (6) 0,1-0,2-0,3-0,4-0,5-0,6
CLUTCH ELECTROMAGNETIC ELECTROMAGNETIC ELECTROMAGNETIC ELECTROMAGNETIC
MAIN MOTOR POWER, MOTOR 1500 rpm. 3 HP 4 HP 5,5 HP 7,5 HP
SPINDLE CONE CM.4 CM.4 CM.5
SPINDLE STROKE 200 mm 230 mm 260 mm 260 mm
DISTANCE SPINDLE-COLUMN 360 mm 400 mm 420 mm 420 mm
DISTANCE SPINDLE-TABLE Min. 35/Max. 835 Min. 50/Max.850 Min. 25/Max. 825 Min. 25/Max. 825
DISTANCE SPINDLE-BASE 1.240 mm 1.290 mm 1.270 mm 1.270 mm
COLUMN DIAMETER Ø175 mm Ø200 mm Ø220 mm Ø220 mm
DIMENSIONS OF THE TABLE WITH 3 T SLOTS 550x550 mm 550x550 mm 600X600 mm 600X600 mm
DIMENSIONS OF THE BASE WITH T SLOTS 950 x 550 mm 1060 x 600 mm 1060 x 600 mm 1060 x 600 mm
WEIGHT: NET / GROSS Kg. 610/695 710/795 820/920 840/940
PACKAGING DIMENSIONS AND VOLUME 2500 x 600 x 1200 mm / 1,80 m3 2600 x 600 x 1200mm / 1,88 m3 2700 x 700 x 1200 / 2,27 m3 2700x700x1200 / 2,27 m3
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com