Print this page

Erlo G-32 Serie Column Drilling Machine with Manual Feed

Column drilling machine with manual feed and geared drive. Drilling capacity: 32 mm (1 17/64").

Round Column Drilling Machine with Manual Feed

  • Feed manual
  • Transmission gears
  • Column diameter: 100 mm
  • Distance from spindle to column: 250 mm
  • Moveable table and fixed bit
  • Drilling capacity: ⌀ 32 mm
  • Tapping capacity: M 24
  • Spindle cone: CM 3
  • Engine power: 2 | 3 HP
  • Num. and selections of speeds: (8) 65 – 3060 rpm
  • Drilling depth: 120 mm
  • Weight: 260 kg
  • Measurements: 655 x 400 x 2100 mm

Standard Equipment

  • Adjustable depth end
  • Tool ejector
  • Emergency push button
  • Turning sense selector
  • Electrical equipment at low voltage
  • Drill guard with stop micro
  • CE norms

Optional Equipment

  • Lighting equipment
  • Coolant equipment
  • Rotating table
  • Tapping system IR/RS

Technical Specifications

MODEL G.32
DRILLING CAPACITY IN STEEL OF 70 Kg. 32 mm
TAPPING CAPACITY IN STEEL OF 70 Kg. M24
TRANSMISSION GEARS (Hardened and grounded)
SPEED NUMBER AND RANGE 65-125-185-365-540-1055-1560-3060 rpm
FEED MANUAL
NUMBER AND RANGE OF FEEDS -
CLUTCH -
MAIN MOTOR POWER - 750/1500 rpm 2/3 HP
SPINDLE CONE MT3
SPINDLE STROKE 120 mm
DISTANCE SPINDLE-COLUMN 250 mm
DISTANCE SPINDLE-TABLE Min. 85 mm/ Max. 635 mm
DISTANCE SPINDLE-BASE 1170 mm
COLUMN DIAMETER Ø100 mm
DIMENSIONS OF THE TABLE (WITH 2 T SLOTS) 270 x 300 mm
DIMENSIONS OF THE BASE WITHOUT T SLOTS (WITHOUT COOLANT) 600 x 380 mm
DIMENSIONS OF THE BASE WITH T SLOTS (WITH COOLANT) 665 x 400 mm
WEIGHT: NET / GROSS Kg. 260 / 320 Kg.
PACKAGING DIMENSIONS AND VOLUME 2110 x 570 x 800 mm / 0,97m3
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com