Print this page

Erlo SH Serie Automatic Benchtop Tapping and Drilling Machine

Benchtop tapping and drilling machine with manual drilling feed, automatic tapping feed and V-belt drive. Drilling capacity: 18-30 mm (0 45/64" - 1 3/16"). Tapping capacity: M 14-25

Benchtop Tapping Machine with Pattern Spindle Threading Automatic Feed

  • Feed pattern spindle threading automatic
  • Manual drilling feed
  • Transmission belts
  • Column diameter: 100 mm
  • Distance from spindle to column: 250 mm
  • Fixed table, moveable and rotating bit
  • Tapping capacity: M 14-25
  • Spindle cone: CM 3
  • Engine power: 1.5 | 2 HP
  • Num. and selections of speeds: (10) 245-4000 rpm
  • Drilling depth: 90 mm
  • Weight: 240 kg
  • Cooling equipment: Optional
  • Light equipment

Standard Equipment

  • Table/base with “T” slots
  • Adjustable depth end
  • Lighting equipment
  • Tool ejector
  • Belt cover with stop micro
  • 1 lead screw included, pitch to be determined
  • Tapping cycle selection (1 cycle / continuous cycle)
  • Automatic or manual tapping selection
  • Adjustable ends and micros, for depth, turning and stop
  • Bracking device for variator
  • Emergency push button
  • Main switch
  • Turning sense selector
  • Electrical equipment at low voltage
  • Electrical equipment in a separate cabinet
  • Drill guard with stop micro
  • CE norms

Optional Equipment

  • Frontal wheel for fine sensitive feed
  • Depth digital reader
  • Lead screw, special pitch
  • Lead screw, standard pitch
  • Cycles counter
  • Fixed intermediate table
  • Rotating intermediate table
  • Column supplement
  • Cycle start foot switch
  • Non reversible tap holder, capacity M3 to M16 with locking nut
  • Coolant equipment

Available Models

  • SH.18
  • SH.30

Technical Specifications

MODEL SH.18 SH.30
TAPPING CAPACITY IN STEEL OF 70 Kg M14 M25
TRANSMISSION V-BELT V-BELT
SPEED NUMBER AND RANGE (WITHOUT VARIATOR) 50 Hz. (10) 245 - 355 - 490 - 710 - 835 - 1.240 - 1.670 - 2.000 - 2.480 - 4.000 rpm (10) 245 - 355 - 490 - 710 - 835 - 1.240 - 1.670 - 2.000 - 2.480 - 4.000 rpm
DRILLING FEED MANUAL MANUAL
MAIN MOTOR POWER MOTOR 1000 rpm 1,5 HP 2 HP
SPINDLE CONE CM.3 CM.3
MAXIMUM TAPPING DEPTH 90 mm 90 mm
DISTANCE SPINDLE-COLUMN 250 mm 250 mm
DISTANCE SPINDLE-TABLE (MODELS WITHOUT COOLANT) Min. 155 mm/ Max. 485 mm Min. 155 mm/ Max. 485 mm
DISTANCE SPINDLE-TABLE (MODELS WITH COOLANT) Min. 225 mm/ Max. 555 mm Min. 225 mm/ Max. 555 mm
COLUMN DIAMETER Ø100 mm Ø100 mm
DIMENSIONS OF THE TABLE/BASE (WITHOUT COOLANT) 270 x 270 mm 270 x 270 mm
DIMENSIONS OF THE TABLE/BASE (WITH COOLANT) 316 x 288 mm 316 x 288 mm
WEIGHT: NET / GROSS Kg. WITH BASE CABINET 230 / 250 Kg. 230 / 250 Kg.
PACKAGING DIMENSIONS AND VOLUME WITH BASE CABINET 1100 x 700 x 1900 mm / 1,5 m3 1100 x 700 x 1900 mm / 1,5 m3
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com