Print this page

Erlo SHEA Serie Benchtop Tapping and Drilling Machine with Automatic Feed

Benchtop tapping and drilling machine with automatic drilling feed, automatic tapping feed and transmission gears. Drilling capacity: 30 mm (1 3/16"). Tapping capacity: M 25.

Benchtop Tapping Machine with Pattern Spindle Threading Automatic Feed

  • Feed pattern spindle threading automatic
  • Automatic drilling feed
  • Feed: 0,10 - 0,20
  • Transmission gears
  • Column diameter: 100 mm
  • Distance from spindle to column: 300 mm
  • Fixed table, moveable and rotating bit
  • Tapping capacity: M 25
  • Spindle cone: CM 3
  • Engine power: 2 HP
  • Num. and selections of speeds: (8) 65 – 3060 rpm
  • Drilling depth: 90 mm
  • Weight: 300 kg
  • Cooling equipment: Optional
  • Light equipment

Standard Equipment

  • Table/base with “T” slots
  • Adjustable depth end
  • Lighting equipment
  • Tool ejector
  • 1 lead screw included, pitch to be determined
  • Tapping cycle selection (1 cycle / continuous cycle)
  • Automatic or manual tapping selection
  • Adjustable ends and micros, for depth, turning and stop
  • Bracking device for variator
  • Emergency push button
  • Main switch
  • Turning sense selector
  • Electrical equipment at low voltage
  • Electrical equipment in a separate cabinet
  • Drill guard with stop micro
  • CE norms

Optional Equipment

  • Frontal wheel for fine sensitive feed (only for SHE serie)
  • Depth digital reader
  • Lead screw, special pitch
  • Lead screw, standard pitch
  • Cycles counter
  • Fixed intermediate table
  • Rotating intermediate table
  • Column supplement
  • Cycle start foot switch
  • Non reversible tap holder, capacity M3 to M16 with locking nut
  • Coolant equipment

Available Models

  • SHE.30
  • SHEA.30

Technical Specifications

MODEL SHE.30 SHEA.30
TAPPING CAPACITY IN STEEL OF 70 Kg. M25 M25
TRANSMISSION GEARS (Hardened and grounded) GEARS (Hardened and grounded)
SPEED NUMBER AND RANGE (WITHOUT VARIATOR). (8) 65 - 125 - 185 - 365 - 540 - 1.055 - 1.560 - 3.060 rpm (8) 65 - 125 - 185 - 365 - 540 - 1.055 - 1.560 - 3.060 rpm
DRILLING FEED MANUELLE AUTOMATIC
NUMBER AND RANGE OF FEEDS - (2) 0,10-0,20
MAIN MOTOR POWER MOTOR 1500 rpm. 2 HP 2 HP
SPINDLE CONE CM.3 CM.3
MAXIMUM TAPPING DEPTH 90 mm 90 mm
DISTANCE SPINDLE-COLUMN 250 mm 250 mm/td>
DISTANCE SPINDLE-TABLE (MODELS WITHOUT COOLANT) Min. 155 / Max. 485 mm Min. 155 / Max. 485 mm
DISTANCE SPINDLE-TABLE (MODELS WITH COOLANT) Min. 225 / max. 555 mm Min. 225 / max. 555 mm
COLUMN DIAMETER Ø100 mm Ø100 mm
DIMENSIONS OF THE TABLE/BASE (WITHOUT COOLANT) 270 x 270 mm 270 x 270 mm
DIMENSIONS OF THE TABLE/BASE (WITH COOLANT) 316 x 288 mm 316 x 288 mm
WEIGHT: NET / GROSS Kg. WITH BASE CABINET 290 / 340 Kg 290 / 340 Kg
PACKAGING DIMENSIONS AND VOLUME WITH BASE CABINET 1100 x 700 x 2250 mm 1100 x 700 x 2250 mm
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com