Erlo TS Serie Round Column Drilling Machine with Manual Feed

Round column drill with manual feed and transmission gears. Drilling capacity: 25-30 mm (0 63/64" - 1 3/16").

Drilling Machine with Manual Feed

Manual feed
Transmission gears
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Moveable table and fixed bit
Drilling capacity: ⌀ 25-30 mm
Tapping capacity: M 22-25
Spindle cone: CM 3
Engine power: 1.1/1.6 | 1.5/1.9 HP
Num. and selections of speeds: (8) 65 – 3060 rpm
Drilling depth: 120 mm
Weight: 260 kg
Measurements: 655 x 400 x 2100 mm
Cooling equipment: Optional
Light equipment

Standard Equipment

Adjustable depth end
Lighting equipment
Tool ejector
Motor guard and emergency push button
Main switch
Turning sense selector
Electrical equipment at low voltage
Electrical equipment in a separate cabinet
Drill guard with stop micro
CE norms

Optional Equipment

Frontal wheel for fine sensitive feed (only for TS serie
Speed electronic variator
Speed digital reader (for models with variator)
Depth digital reader
Tapping system IR/RS
Tapping system IR/RS (for models with variator)
Automatic tapping system by lead screw
Rotating table
Cycles counter (for models with hydroblock)
Column supplement
Hydroblock (for models TS)
Coolant equipent in the base

Available Models

TS.25
TS.30
TSA.25
TSA.30

Technical Specifications

MODEL	TS.25	TS.30	TSA.25	TSA.30
DRILLING CAPACITY IN STEEL OF 70 Kg. (mm)	25 mm	30 mm	25 mm	30 mm
TAPPING CAPACITY IN STEEL OF 70 Kg	M22	M25	M22	M25
TRANSMISSION	GEARS (Hardened and grounded)				GEARS (Hardened and grounded)	GEARS (Hardened and grounded)	GEARS (Hardened and grounded)
SPEED NUMBER AND RANGE (WITHOUT VARIATOR)	(8) 65 - 125 - 185 - 365 - 540 - 1.055 - 1.560 - 3.060 rpm				(8) 65 - 125 - 185 - 365 - 540 - 1.055 - 1.560 - 3.060 rpm	(8) 65 - 125 - 185 - 365 - 540 - 1.055 - 1.560 - 3.060 rpm	(8) 65 - 125 - 185 - 365 - 540 - 1.055 - 1.560 - 3.060 rpm
SPEED NUMBER AND RANGE (WITH VARIATOR)	VARIABLES A )45-125 B) 125-370 C) 380-1070 D) 1100-3100 rpm				VARIABLES A )45-125 B) 125-370 C) 380-1070 D) 1100-3100 rpm	VARIABLES A )45-125 B) 125-370 C) 380-1070 D) 1100-3100 rpm	VARIABLES A )45-125 B) 125-370 C) 380-1070 D) 1100-3100 rpm
FEED	MANUAL	MANUAL	AUTOMATIC	AUTOMATIC
NUMBER AND RANGE OF FEEDS	-	-	(2) 0,10-0,20	(2) 0,10-0,20
MAIN MOTOR POWER (WITHOUT VARIATOR) MOTOR 1500/3000 rpm	1,1/1,6 HP	1,5/1,9 HP	1,1/1,6 HP	1,5/1,9 HP
MAIN MOTOR POWER (WITH VARIATOR) MOTOR 1500 rpm.	2 HP				2 HP	2 HP	2 HP
SPINDLE CONE	CM.3				CM.3	CM.3	CM.3
SPINDLE STROKE	120 mm				120 mm	120 mm	120 mm
SPINDLE STROKE WITH HYDROBLOCK (SERIE TS)	90 mm	90 mm	-	-
DISTANCE SPINDLE-COLUMN	250 mm				250 mm	250 mm	250 mm
DISTANCE SPINDLE-TABLE	Mín. 170/Máx. 660 mm				Mín. 170/Máx. 660 mm	Mín. 170/Máx. 660 mm	Mín. 170/Máx. 660 mm
DISTANCE SPINDLE-BASE	1216 mm				1216 mm	1216 mm	1216 mm
COLUMN DIAMETER	Ø100 mm				Ø100 mm	Ø100 mm	Ø100 mm
DIMENSIONS OF THE TABLE (WITH 2 T SLOTS)	270x300 mm				270x300 mm	270x300 mm	270x300 mm
DIMENSIONS OF THE BASE WITHOUT T SLOTS (WITHOUT COOLANT)	600x380 mm				600x380 mm	600x380 mm	600x380 mm
DIMENSIONS OF THE BASE WITH T SLOTS (WITH COOLANT)	665x400 mm				665x400 mm	665x400 mm	665x400 mm
WEIGHT: NET / GROSS Kg	260 / 320 Kg				260 / 320 Kg	260 / 320 Kg	260 / 320 Kg
PACKAGING DIMENSIONS AND VOLUME	2200 x 600 x 900 / 1,19 m				2200 x 600 x 900 / 1,19 m	22200 x 600 x 900 / 1,19 m	2200 x 600 x 900 / 1,19 m