Print this page

Erlo TCA Serie Round Column Drilling Machine with Automatic Feed

Round column drill with automatic feed, mechanical clutch, transmission gears. Drilling capacity: 40-50 mm (1 37/64" - 1 49/64").

Round Column Drilling Machine with Mechanical Automatic Feed

TCA 40 Serie

  • Feed mechanical automatic
  • Transmission gears
  • Column diameter: 175 mm
  • Distance from spindle to column: 360 mm
  • Fixed table, moveable and rotating bit
  • Tiltable rotating table
  • Front wheel for sensitive fine feed
  • Drilling capacity: ⌀ 40 mm
  • Tapping capacity: M 33
  • Feed: 0,10-0,20-0,30-0,40
  • Spindle cone: CM 4
  • Engine power: 2 HP
  • Num. and selections of speeds: (9) 61 - 1169 rpm
  • Drilling depth: 200 mm
  • Weight: 610 kg
  • Cooling equipment
  • Light equipment

TCA-50 Serie

  • Feed mechanical automatic
  • Transmission gears
  • Column diameter: 200 mm
  • Distance from spindle to column: 400 mm
  • Fixed table, moveable and rotating bit
  • Tiltable rotating table
  • Front wheel for sensitive fine feed
  • Drilling capacity: ⌀ 50 mm
  • Tapping capacity: M 36
  • Feed: 0,10-0,20-0,30-0,40
  • Spindle cone: CM 4
  • Engine power: 4 HP
  • Num. and selections of speeds: (9) 54 - 1032 rpm
  • Drilling depth: 230 mm
  • Weight: 710 kg
  • Cooling equipment
  • Light equipment
  • Note: In case of constant raise and lower of the table’s height, the installation of the accessory Motorized Table MA is recommended.

Standard Equipment

  • Hardened and high quality steel gears
  • Speed plate and selecting levers on head
  • Gear box lubrication by automatic pumps
  • Machine base with coolant tank and pump
  • Worklight
  • Rotating and tilting table
  • Automatic feed and cut-off by mechanic clutch
  • Frontal wheel for fine sensitive feed
  • Depth scale and adjustable depth stop
  • Automatic tool ejector
  • Electric equipment integrated on machine’s head
  • Emergency stop push button
  • Spindle reversing switch
  • Safety drill guard with microswitch
  • CE marks

Optional Equipment

  • Tapping system IR/RS
  • Tapping system IR/RS by pressing the buttons at handles
  • Automatic tapping system by lead screw with brake by variator
  • Automatic tapping system by lead screw with brake by variator and digital rpm reader
  • Reduced feeds (50% from standard range)
  • Column supplement 200 mm.
  • Speed electronic variator
  • Speed electronic variator and digital reader
  • Depth digital reader
  • Please inquiry for special motors
  • Auxiliary command box (start-stop and emergency stop)
  • v

Available Models

  • TCA.40
  • TCA.50

Technical Specifications

MODELE TCA.40 TCA.50
DRILLING CAPACITY IN STEEL OF 70 Kg. (mm) 40 mm 50 mm
TAPPING CAPACITY IN STEEL OF 70 Kg M33 M36
TRANSMISSION GEARS (Hardened and grounded) GEARS (Hardened and grounded)
SPEED NUMBER AND RANGE (WITHOUT VARIATOR) (9) 61-85-123-191-269-390-574-806-1169 rpm. (9) 54-75-109-169-237-344-507-712-1032 rpm.
FEED AUTOMATIC AUTOMATIC
SPEED NUMBER AND RANGE (4) 0,10-0,20-0,30-0,40 (4) 0,10-0,20-0,30-0,40
CLUTCH MECHANIC (Automatic) MECHANIC (Automatic)
MAIN MOTOR POWER, MOTOR 1500 rpm. 3 HP 4 HP
SPINDLE CONE CM.4 CM.4
SPINDLE STROKE 200 mm 230 mm
DISTANCE SPINDLE-COLUMN 360 mm 400 mm
DISTANCE SPINDLE-TABLE Min. 35/Max. 835 Min. 50/Max.850
DISTANCE SPINDLE-BASE 1.240 mm 1.290 mm
COLUMN DIAMETER Ø175 mm Ø200 mm
DIMENSIONS OF THE TABLE WITH 3 T SLOTS 550x550 mm 550x550 mm
DIMENSIONS OF THE BASE WITH T SLOTS 950x550 mm 1060x600 mm
WEIGHT: NET / GROSS Kg. 610/695 710/795
PACKAGING DIMENSIONS AND VOLUME 2500x600x1200 mm / 1,80 m3 2600x600x1200 mm / 1,88 m3
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com