Aceti ART.35 Belt Grinding Machine with Vertical Belt
Technical Specifications
General Technical Info
| Power supply | 400 | 50 | 3 | Volt | Hz | Phase |
| Motor power | 0,85 - 0,65 ( 1,15 - 0,9 ) | kW ( hp ) |
| Motor speed | 2800 - 1400 | tr/min |
| Acoustic emission | 70 | dB |
| Overall dimension (Width x Depth x Height) | 600 x 700 x H. 1400 | mm |
| Weight standard machine | 100 | kg |
Belt Grinder Unit
| Abrasive belt dimension (wide x length) | 25 ÷ 40 x 1700 | mm |
| Peripheral speed | 18 - 9 | m/sec |
| Dimension of working plane (behind abrasive belt) | 25 - 40 x 395 | mm |
| Driving wheel dimension | ø 120 | mm |
| Orientable belt grinding arm | 0 | ° |
| Support table dimension | 280 x 300 | mm |
| Support table revolution | - 20 ÷ + 60 | ° |
Standard Equipment
- Four return wheels and rubberized drive wheel.
- Particular support surface tiltable by degrees from –20 ° to + 60 °.
- Possibility of processing with rigid tape and flexible tape.
- Back plate behind the steel abrasive belt for working with 20 mm rigid belt.
- Back plate behind the steel abrasive belt for machining with 40 mm rigid belt.
- Possibility of mounting belts with a width from 25 mm to 40 mm.
- Abrasive belt 40x1700 mounted on the machine ready to use.
- Abrasive belt 25x1700 positioned inside the base.
- Carter sander with predisposition for connection of suction system Ø80mm.
CE Stamp of Compliance
- Machine with CE conformity mark made respecting the requirements of the most recent directives concerning it.
- Machine complete with instruction manual complete with CE conformity certificate, test sheet and exploded view with relative spare parts list.
- Machine equipped with a set of service keys suitable for the adjustment and maintenance of the machine.
Optional Equipment
IA-1: DUST EXTRACTOR - ONE CONNECTION
DUST EXTRACTOR kit with one suction mouth: complete of dust filter bag in flexible aluminum pipe and hose clamps. The extractor is mounted inside the base and wired to the electrical panel.
TECHNICAL FEATURES
- Motor: Volt 400 - Rpm 2800 - kW 0,55
- Max flow rate: 1.000 m3 / h
- Max total pressure: 85 mm H2O
INV.MF: VARIABLE SPEEDS SINGLE PHASE
Single-phase inverter for electronic regulation of motor revolutions from 300 ÷ 3000 Rpm.The inverter is supplied inside box for the dust protection, which can be controlled with potentiometer and selector of direction of the motor.Motor with maximum power 1,1 kW.
INT.T1: VARIABLE SPEEDS
Three-phase inverter for the electronic adjustment of moto from rpm 300 ÷ 3000 Rpm. The inverter is provided on a separate stand, inside in a dust seal box, external display for the reading of the revolutions of the nominal speed. The speed of the motor is controlled on switch boar of the machine. Motor with maximum power 2,2 kW. Notes: The inverter is dedicated to a single motor control.
TECHNICAL FEATURES
- Net Weight: 40 kg
- Dimensions: 400x400xH.1400
Montfort International
G1P 3T3, Canada