Aceti ART.60 Pipe Notching Machine for Tube Ends Grooving
Technical Specifications
General Technical Info
| Power supply | 400 | 50 | 3 | Volt | Hz | Phase |
| Motor power | 3 (4) | kW ( hp ) |
| Motor speed | 2800 | tr/min |
| Acoustic emission | 70 | dB |
| Overall dimension (Width x Depth x Height) | 650 X 1500 X 1040 | mm |
| Weight standard machine | 125 | kg |
Pipe Notcher
| Abrasive belt dimension (wide x length) | 75 x 2000 | mm |
| Peripheral speed | 30 | m/sec |
| Dimension of working plane (behind abrasive belt) | 75x400 | mm |
| Driving wheel dimension | ø 200 | mm |
| Pipe diameter | ø 20 ÷ ø 70 | mm |
| Angle of pipe notcher | + 90 ÷ +30 | ° |
Standard Equipment
CE Stamp of Compliance
- Machine with CE conformity mark made respecting the requirements of the most recent directives concerning it.
- Machine complete with instruction manual complete with CE conformity certificate, test sheet and exploded view with relative spare parts list.
- Machine equipped with a set of service keys suitable for the adjustment and maintenance of the machine.
Base
Strong base with anti-vibration rubbers at the base and a useful shelf for tools inside.
Electrical panel
Low voltage electric controls with padlock device integrated in the main electric switch.
Vice
Variable angle graduated tube clamping vice with indicator from 30 ° to 90 °.Self-centering vice for round and square tubes.Vice with limit stop device.Side sliding vice for the complete use of the abrasive belt surface.
Support plane
Orientable support surface for working in support near the front contact wheel.
Graphite
Present behind the sanding belt the canvas graphite to reduce friction and heat development.
Contact roller
Nr. 1 contact roller for notching pipes from Ø 1 1/4".Fast and reliable replacement of contact rollers thanks to safety screws.Drawings for the construction of the contact rollers included in the instruction and use manual.
Abrasive belt
Abrasive belt mounted on the machine ready for use.
Dust collection
Dust collection drawer placed under the contact roller.
Anti-spark repair
Transparent protection arrester with friction joint.
Belt grinder cover
Carter sander with predisposition connection system.
Optional Equipment
BAS.02+IA-1: MACHINE STAND WITH DUST EXTRACTION ONE CONNECTION
STAND WITH DUST EXTRACTOR kit with one suction mouth: complete of dust filter bag in flexible aluminum pipe and hose clamps. The extractor is wired to the electrical panel.
TECHNICAL FEATURES
- Motor: Volt 400 - Rpm 2800 - kW 0,55
- Max flow rate: 1.000 m3 / h
- Max total pressure: 85 mm H2O
M2V-TB: DOUBLE SPEEDS MOTOR
Two speeds three-phase motor recommended for use with stainless steel and aluminum.
Rpm 1400/2800 400 volts - 50 Hz - 3 phase
Montfort International
G1P 3T3, Canada