Aceti ART.56 Pipe Notching Machine for Tube Ends Grooving
Technical Specifications
General Technical Info
| Power supply | 400 | 50 | 3 | Volt|Hz|Phase |
| Motor power | 5,0 - 3,0 ( 6,8 - 4 ) | kW ( hp ) |
| Motor speed | 2800 - 1400 | tr/min |
| Acoustic emission | 75 | dB |
| Overall dimension (Width x Depth x Height) | 800 x 1600 x H. 1250 | mm |
| Weight standard machine | 280 | kg |
Pipe Notcher
| Abrasive belt dimension (wide x length) | 150 x 2000 | mm |
| Peripheral speed | 30 - 15 | m/sec |
| Dimension of working plane (behind abrasive belt) | 160 x 400 | mm |
| Driving wheel dimension | ø 200 | mm |
| Pipe diameter | ø 20 ÷ ø 145 | mm |
| Angle of pipe notcher | -30 ÷ 90 ÷ +30 | ° |
Standard Equipment
CE Stamp of Compliance
- Machine with CE conformity mark made respecting the requirements of the most recent directives concerning it.
- Machine complete with instruction manual complete with CE conformity certificate, test sheet and exploded view with relative spare parts list.
- Machine equipped with a set of service keys suitable for the adjustment and maintenance of the machine.
Base
Strong base with anti-vibration rubbers at the base and a useful shelf for tools inside.
Electrical panel
Low voltage electric controls with padlock device integrated in the main electric switch.
Electronic brake card
Emergency stop with electronic motor braking with safety anti-reset function.
Motor
Motor 2 speeds
Vice
Variable angle graduated tube clamping vice with indicator from 30 ° to 90 °.Left and right bidirectional movement.Self-centering vice for round and square tubes.Vice with limit stop device.Side sliding vice for the complete use of the abrasive belt surface.
Rubberized grooved wheel
Rubberized, grooved and balanced drive wheel for better drag of the abrasive belt.
Horizontal surface
Large horizontal surface for general deburring and sanding operations.
Graphite
Present behind the sanding belt the canvas graphite to reduce friction and heat development.
Contact roller
Nr. 3 contact rollers for notching pipes from Ø 3/4 "- 1 1/4" - 3 ".Fast and reliable replacement of contact rollers thanks to safety screws.Drawings for the construction of the contact rollers included in the instruction and use manual.
Abrasive belt
Abrasive belt mounted on the machine ready for use.
Dust collection
Dust collection drawer placed under the contact roller.
Belt grinder cover
Carter sander with predisposition connection system.
Anti-spark repair
Transparent protection arrester with friction joint.
Montfort International
G1P 3T3, Canada