Print this page

Aceti ART.37 Based-Mounted Sheet Metal Deburring Machine with Two Lamellar Wheels

Base-mounted sheet metal deburring machine with two lamellar wheels - two-side deburring - max. thickness 3 mm (0 1/8").

Technical Specifications

General Technical Info

Power supply 400 | 50 | 3 Volt | Hz | Phase
Motor power (2x) 0,75 ( 1,0 ) kW ( hp )
Motor speed 1400 tr/min
Acoustic emission 70 dB
Overall dimension (Width x Depth x Height) 1000 x 700 x H. 1200 mm
Weight standard machine 140 kg

Deburring Unit

Workpiece thickness allowed 1 ÷ 4 mm
Support table dimension 120 x 1000 mm
Workpiece width allowed 50 mm
Brush maximum external size ø 250 mm
Brush maximum wide size 50 mm
Brush minimum hole size 100 mm
Peripheral speed of brush 18 m/sec
Quantity of brush 2 No.

Standard Equipment

CE Stamp of Compliance

  • Machine with CE conformity mark made respecting the requirements of the most recent directives concerning it.
  • Machine complete with instruction manual complete with CE conformity certificate, test sheet and exploded view with relative spare parts list.
  • Machine equipped with a set of service keys suitable for the adjustment and maintenance of the machine.

Base

Strong base with anti-vibration rubbers at the base and a useful shelf for tools inside.

Electrical panel

Low voltage electric controls with padlock device integrated in the main electric switch.

Electronic brake card

Emergency stop with electronic motor braking with safety anti-reset function.

Guides

Guides hardened, cemented, grinded and grooved for a prolonged resistance to attrition.

Support

Support removable floor plate.

Handwheel

Sheet thickness adjustment handwheel.

Working

Deburring of the sheet above and below in a single pass.Axial displacement of the flap brushes for the full utilization of the abrasive surface.

Lamellar abrasive wheel

Two lamellar abrasive wheels mounted on the machine ready for use.

Locking accessories

Locking and reducing steel flange for brush, flap wheel with spacers and clamping nuts.

Belt grinder cover

Carter sander with predisposition connection system.

Optional Equipment

Dust Extractor - One Connection

DUST EXTRACTOR kit with one suction mouth: complete of dust filter bag in flexible aluminum pipe and hose clamps. The extractor is mounted inside the base and wired to the electrical panel.

TECHNICAL FEATURES

  • Motor: Volt 400 - Rpm 2800 - kW 0,55
  • Max flow rate: 1.000 m3 / h
  • Max total pressure: 85 mm H2O
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com