Print this page

Roty-Tyro CPM 22 / 28 Manual Drilling Centre With Automatic Bar Feeds

Manual drilling machine for bars and profiles. Our entry-level drilling machine CPM 22/CPM 28 is suitable for all types of profiles (round, square, rectangular) and all types of flat iron: steel, stainless steel or plastic. Very easy to use, the operator loads the profile into the feeding clamp and can start production. The head is lowered manually.

Features

  • Drilling capacity on steel 50 kg: Ø22 or Ø28 mm
  • Cone: CM2 or CM3
  • Ø column: 80 or 100mm ; Ø spindle: 52 or 80mm
  • Spindle stroke: 120 or 125mm
  • Motor 1 HP or 1,5 HP, three phase 400V
  • Speed: 100 to 4400 rpm or 80 to 3000 rpm with an electronic speed controller
  • Manual spindle descent
  • Pneumatic clamp, maximum opening: 200 mm, maximum distance between rear jaw/ spindle axis: 100 mm
  • Adjustable back jaw by screw, wheel and mechanical digital display
  • Resolution 0,1 mm

Options

  • Lightning 24 V
  • ETHERNET connection kit with 3m cable + software
  • Lubrication by pneumatic spraying “AIRLUB with tank”
  • WIFI remote control
  • Horizontal roller convoyer at the machine exit

Feeding by Numerical Command ( Basic model)

  • Carriage guidance by precision rollers on hardened and ground guides (63 HRC)
  • Operated by brushless servo-motor, automatic adjustment of the rack and pinion set.
  • Close-loop servo control
  • Roller width: 200mm
  • Safety metal sheet between each roller.
  • Frame in extruded aluminium
  • Length: 2000 to 8000mm
  • Movement speed: 400mm/s
  • Resolution : 0,01 mm
  • Precision : ± 0,1 mm per meter
  • The removal is controllable from the console and on the terminal block
  • Pneumatic clamp with adjustable opening: 0 to 200mm
  • Cable emergency stop

Numerical Command's Features

  • 5,7’’ colour touch screen. Menus accessible at all time by tabs.
  • 100 Programs of 96 lines (equals to 16 pages of 6 lines)
  • Absolute or relative measures in the same program.
  • Adjustable parameters: origin – speed – ramps – tool thickness, etc…
  • Integrated mini-controller available to the customer (4E/2S)
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com