Roty-Tyro CP 220 / 420 Automatic Drilling Centre With Numerical Command

The CP220 or CP420 multifunction drilling bench is suitable for working on any type of profile (round, square, rectangular) and any type of flat iron (steel, stainless steel or plastic) along the X and Y axes. The operator loads the profile into the VISUMATIC’s feed clamp and can start production automatically. A high speed option is available on this machine, it is useful depending on the materials to be drilled and/or the type of machining to be carried out.

Depending on your production rates and the width of your bars and profiles, we can offer a device with one or two heads, a 220 mm or 420 mm wide with high execution precision.

• Drilling capacity:  standard at 25 mm, high speed at 25 mm
• Longitudinal length X : 1000 to 8 000 mm, speed : 24 m/mn
• Transversal length Y : 200 to 400 mm,
  speed : 6 m/mn
• Vertical length Z : 290 mm, speed: 6 m/mn
• Maximum drilling capacity:
  – steel : 25 mm
  – stainless steel: 20 mm
  – aluminium : 20mm
• Maximum aluminium tapping capacity: 14 mm
• 1 or 2 heads
• Drive motors : 5,5 kw
• Variable speed: 300 to 3000 rpm controlled by numerical control (NC)
• Drilling stroke: 150 mm (total: 290 mm)
• Spindle nose HSK63 on each head with quick manual changing tool by ¼ turn
• Pneumatic clamp with opening: 200 to 400 mm
• Transversal length: 400 mm

• Carriage guidance by precision rollers on hardened and ground guides
  (63 HRC)
• Table width: 200 or 400 mm in extruded aluminium, with rollers
  Ø40mm for 200 pitch
• Safety metal sheet between each rollers
• Automatic adjustment of the rack and pinion set.
• Movement speed adjustable: 0 to 24 m/min
•  Length: 1000 mm to 8000 mm
• Pneumatic clamps with adjustable opening :0 to 200 mm or 0 to 400 mm

• Automatic reference search
• Management of tool lengths
• Standard programming:
  • Absolute or relative movement
  • Absolute movement + machining
  • Relative movement + machining + repetition
  • Planned stop for tool change
• Program memory : 900 K characters
• Optimisation of hollow profile drilling
• Link with RS232