Print this page
Roty-Tyro Alumatic Aluminium Plates and Sheets CNC Cutting Machine
Our ALUMATIC numerically controlled sawing machine cuts thick aluminum plates (up to 200mm) but also non-ferrous metals or composites. This aluminum plate cutting machine is also suitable for cutting sandwich panels (metal wall 2 mm thick with polyurethane foam). Widely used in the aeronautics sector, this large capacity aluminum sawing machine will allow you to obtain clean cuts and gain in productivity whilst in complete safety.
Features
- Carbide milling cutter Ø500 or Ø 600 mm – bore: Ø40mm
- Motor 15 HP or 20 HP, three phase 400V
- Blade rotation speed: 60 m/s
- Total width : 1200 mm
- Working space height: 1000 mm
- Wide working table equipped with ball bearing or aircushion table (in option)
- Load accepted : up to 600 kg/m²
- Pneumatic holder. Integrated suction socket.
- Clamping length: 200 mm
- CE certified machine
Various Equipment
- Removable gunnel for metal chips removal
- Control panel to define the control units, ammeter, digital indicator, etc.
- Workspace protection for the operator
- Programmable machine using numeric controls.
Sawing Head
- Carbide milling cutter Ø 500 or Ø 600 mm – bore: Ø 40 mm (furniture not included)
- Motor 15 HP or 20 HP, three phase 400 V
- Blade rotation speed: 60 m/s
- POLY-V belt drive
- Pneumatic spray mist lubrication on the blade
- Blade retraction when the cut is finished by electric jack
- Adjustable cutting height: 0 - 150 mm maxi for 15 HP (thick plate of 120 mm using a disk Ø 500 mm) and 0 - 200 mm maxi for 20 HP (ex: thick plate of 150 mm using a disk Ø 600 mm)
- Adjustable and memorable blade outlet
Conveyor
- Guidance using heavy-duty rollers on prismatic rail of large section
- Automatic feed-rate adjustable from 0 - 12 m/mn (using an electronic speed variator) - Fast-return at 24 m/mm
- Rack and pinion driven
- Maximum cutting length: 4050 mm (+ on demand), adjustable using a digital indicator
- Minimum cutting strip: 10 % of the thickness of the material in the limit of 5 mm
Table
- Wide working table equipped with ball bearing or aircushion table (in option)
- Upstream table width: 900 mm
- Total width : 1200 mm
- Working space height: 1000 mm
- Work surface fitted with ball bearings spaced at 200 mm
- Load 15 HP : 450 kg/m² and 20 CV : 600 kg/m²
Clamping
- Pneumatic holder. Integrated suction socket.
- Clamping length: 150 mm for 15 HP and 200 mm for 20 HP
- Clamping on both side of the blade. The holder acts as a protective casing.
- Anti-tilting system by the cylinders synchronisation
- Elastic belt for force distribution
Options
- Air cushion table
- Ease the manipulation of heavy plates without any surface scratches
- Upstream table width: 900 mm
- Table made of 1 fixed module (near control panel): 1500 x 800 mm and 1 mobile module on rail: 1500 x 800 mm
- 2 turbines placed under each module
- Working space height: 1050 mm
- Load: 600 kg/m²
- Programmable back stop
- Back stop moves in parallel of the cut
- Guided by ball rollers on a treated & rectified slides 63HRC
- Movement by 2 synchronised screws and a variable speed gear motor
- Setting: 0 -1000 mm (1500 or 2000 mm - optional)
- Digital display – resolution: 0,01 mm - Precision : 0,1 + 0,05 mm per meter
- Protection by mesh barrier with secure access gate.
- Electronic speed variator
- Remote control assitance
- Chip vacuum cleaner – TPA 311-28
- Laser for cutting visualisation
Montfort International
2500 av. Watt, Quebec City (Qc),
G1P 3T3, Canada
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com