Bianco 330 AE Automatic Bandsawing Machine
Automatic Bandsawing Machine with Cutting Capacity up to 60 ° to the Right
The Bianco 330 AE is an automatic band saw machine with bow, vice movement and material feeding at hydraulic control. Automatic fast up/down bow movement controlled by feeler pin. Downfeed with infinitesimal adjustment. Manual setting of the cutting length through mechanical handle, quantity of pieces to be cut and all machine functions are operated and controlled by PLC. Mechanical blade tensioning controlled by limit switch. The machine is equipped with perimetrical safety protection, double safety button for cycle start-up and low voltage electrical system according to EC rules.
While the machine is operating in automatic mode, we suggest you not to feed full material bigger than 150 mm Ø The CNC model allows to control all the machine functions and possibility to store up to 99 cutting programs.
The chip conveyor can not be installed on “AE” models.
Features
- Cutting capacities up to 60° right
- Manual setting of the cutting length by handle
- PLC setting of the quantity of pieces to be cut
- Reducer unit with hardened and ground gears
- Bow command cylinder located near the fix blade-guide block
- Available with CNC or TOUCH control as the model Bianco 330 AE CNC
- Bow: Red RAL 3002
- Base: Gray RAL 7022
Cutting Capacity mm
| Ø | ⧄ | ⍂ | |
|---|---|---|---|
| 90° mm | 260 | 240 | 330 x 120 |
| 45° mm | 200 | 190 | 200 x 130 |
| 60° mm | 120 | 115 | 120 x 100 |
| Blade | 118-1/2" x 1" x 0.035" 3010 x 27 x 0,9 mm |
||
Technical Specifications
| Blade dimensions | 118-1/2" x 1" x 0.035" 3010 x 27 x 0,9 mm |
| Cutting speed | 35 - 70 m/min |
| Working surface height | 835 mm |
| Blade motor | 0,9 - 1,5 kW (V400) |
| Hydraulic unit motor | 0,37 kW |
| Cooling pump motor | 0,12 kW |
| Carriage stroke | 600 mm |
| Scrap length | 220 mm |
| Dimensions (L x W x H) | 280 x 205 x 190 cm |
| Transport dimensions (L x W x H) | 240 x 170 x 170 cm |
| Weight | 1090 Kg |
Standard Accessories
- Discharge tray
- Powered cleaning brush
- Frequency Converter 'I'(standard on CNC models)
- Blade deflection control device 'DL' (standard on TOUCH models)
Optional Accessories
Dry Cooling Device 'TS'
Adjustable vice pressure 'R2'
Frequency Converter 'I' (standard on CNC models)
Blade speed variator 'V'
Mechanical bundle clamping device 'TFMA'
Hydraulic bundle clamping device 'TFIA'
Blade deflection control device 'DL' (standard on TOUCH models)
Cutting angle display 'VG'
7” touch screen 'T7' (Available on CNC models)
10” touch screen 'T10' (Available on TOUCH models)
Automatic bow mitre rotation 'RA' (Available on CNC and TOUCH models)
Montfort International
G1P 3T3, Canada