Bianco 370 AE Automatic Bandsawing Machine
Automatic Bandsawing Machine with Cutting Capacities up to 60° Right
The Bianco 330 AE is an automatic band saw machine equipped with hydraulic controlled bow, vice and material feeding.Downfeed with infinitesimal adjustment. Manual setting of the cutting length trough mechanical handle, quantity of pieces to be cut and all machine functions are operated and controlled by PLC. Automatic fast up/down bow movement controlled by feeler pin. The machine is equipped with perimetrical safety protection and a double safety button for cycle start-up. The sawing machine's low voltage electrical system was made according to EC rules.
We suggest you not to feed full material bigger than 150 mm Ø while the machine is operating in automatic mode. NC model can control all the machine functions and can store up to 99 cutting programs.
The chip conveyor cannot be installed on “AE” models.
Features
- Cutting capacities up to 60° right
- Manual setting of the cutting length trough mechanical handle
- Quantity of pieces to be cut controlled by PLC
- Reducer unit with hardened and ground gears
- Bow command cylinder located near the fix blade-guide block
- Available as well with the CNC or TOUCH control and display options as the Bianco 330 AE CNC
- Bow: Red RAL 3002
- Base: Gray RAL 7022
Cutting Capacity mm
| Ø | ⧄ | ⍂ | |
|---|---|---|---|
| 90° mm | 280 | 240 | 330 x 240 |
| 45° mm | 225 | 215 | 230 x 140 |
| 60° mm | 140 | 140 | 140 x 130 |
| Blade | 122-1/2" x 1" x 0.035" 3120 x 27 x 0,9 mm |
||
Technical Specifications
| Blade dimensions | 122-1/2" x 1" x 0.035" 3120 x 27 x 0,9 mm |
| Cutting speed | 35 - 70 m/min |
| Working surface height | 835 mm |
| Blade motor | 0,9 - 1,5 kW (V400) |
| Hydraulic unit motor | 0,37 kW |
| Cooling pump motor | 0,12 kW |
| Carriage stroke | 600 mm |
| Scrap length | 220 mm |
| Dimensions (L x W x H) | 280 x 205 x 190 cm |
| Transport dimensions (L x W x H) | 240 x 170 x 170 cm |
| Weight | 1090 Kg |
Standard Accessories
- Discharge tray
- Powered cleaning brush
- Frequency Converter 'I'(standard on CNC models)
- Blade deflection control device 'DL' (standard on TOUCH models)
Optional Accessories
Dry Cooling Device 'TS'
Adjustable vice pressure 'R2'
Frequency Converter 'I'
Blade Speed Variator 'V'
Mechanical bundle clamping device 'TFMA'
Hydraulic bundle clamping device 'TFIA'
Blade deflection control device 'DL' (standard on TOUCH models)
Cutting angle display 'VG'
7" TOUCH screen 'T7' (Available on CNC models)
10" TOUCH screen 'T10' (Available on TOUCH models)
Montfort International
G1P 3T3, Canada