LESTHER J-CNC E - CNC 3 Axes Machining Center
Machine Features
- Choice of X-axis travels: 3,500/4,500/5,500/6,500mm.
- Table type: vise
- ISO 30 spindle
Spindle speed: 18,000 RPM - 8 tools carousel tool magazine.
- Travelling column design features increased machining efficiency and accuracy.
- Three axes are equipped with high precision linear guide ways.
- Y Z axis ball screw is directly coupled with servo motor, high transmission efficiency and high accuracy.
- Choice of controllers – PC based.(Mitsubishi, Fanuc and Siemens optional)
Automatic Tool Changer
- 8-tools carousel tool magazine.
- Accommodates ISO 30 tools.
- Tool selection method is bi-directional and random providing fast tool change and smooth motions.
3 AXIS Schematic diagram
Three axes are equipped with high precision linear guide ways.
Dimensions
| Model | J-6500E | J-3500E |
|---|---|---|
| Machine Dimensions (L x W x H) | 8,900 x 1,600 x 2,300 mm | 5,900 x 1,600 x 2,300 mm |
| Table | 6,500 x 300 mm | 3,500 x 300 mm |
Applicable Materials
- Aluminum
- Plastic
- Other non-ferrous metals
Applicable Industries
- Aluminum doors and windows
- Curtain Wall (glass wall)
- Extruded aluminum
- Fiber glass
Machining Way
Multi-Machining for Short Work Pieces
For machining short work pieces, the operator may mount the work pieces on the table to machine simultaneously.
Extra Long Work Piece Machining
This machine is excellent for machining extra-long work pieces with only one setup. Suitable machining includes milling, drilling and tapping. With such machining nodes, you can save considerable time.
Different Parts Machining
With this mode of machining, greater efficiency can be obtained.
Standard Equipment
Laser Interferometer
After each machine has been assembled, our experienced personnel applies a Laser interferometer to inspect and calibrate ball screw pitch error and backlash, positioning accuracy, as well as repeatability on the X, Y and Z-axes. Through the laser inspection process, we can guarantee high feed accuracy on three axes as well as overall machining accuracy.
Ball Bar Test
To assure the highest structural mechanical assembly accuracy, and to eliminate the reverse spike phenomenon, all Bar tested during the assembly processes. The test will calibrate the machine to the optimum status, thus extend the life time of axial ball screw and slide ways.
HSD ES951 High Quality High Speed Spindle
Planetary Gear Reducer
Advanced CNC Controller
SYNTEC controller
Mitsubishi Controller
Fanuc Controller
PC-Base CNC Controller
Machines are equipped with Syntec PC-Base CNC controller, featuring easy to learn and easy to operate. Mitsubishi, Fanuc or Siemens controller is optional.
Optional Equipment
Twin Angle Head
Twin Angle Head with the sawblade
90° Angular Head with the sawblade
Chain Type Chip Conveyor
Technical Specifications
| Model | J-CNC 6500 E |
|---|---|
| X-Axis Stroke | 3,500 / 4,500 / 5,500 / 6,500 mm (Opt.) |
| Y-Axis Stroke | 300 mm |
| Z-Axis Stroke | 200 mm |
| Distance from spindle nose to table surface | Min. 150 mm, Max. 350 mm |
| Table Type | vise (1set /per meter) |
| Table Size | 300 x (3,500 ~ 6,500) mm |
| T-Slot(NO. x Pitch x Size) | 850 mm |
| Spindle Speed | 18,000 R.P.M. |
| Spindle Motor | 10HP (7.5 kw) |
| Spindle Taper Cone | ISO 30 |
| Rapid feed rate (X/Y/Z) | X:60 m/min, Y:24 m/min, Z:24 m/min |
| Servo Motors 3 Axes | X: 1.3kw, Y: 1.3kw, Z: 1.3kw |
| Cutting Feed Rate | F:1 ~ 5,000 mm/min |
| Repeatability Accuracy | X: ±0.03 mm, Y: ±0.02 mm, Z: ±0.02 mm |
| Magazine Capacity | 8 Tools |
| Tood Holder | ISO 30 |
| Max. Tool Diameter | 50 mm |
| Required Pneumatic Pressure | 6 kgs/cm2 |
| Machine Dimensions | 5,400 ~ 8,900 x 1,600 x 2,300 mm |
| Packing Dimensions | 5,600 ~ 9,100 x 1,700 x 2,300 mm |
| Machine Weight | 3,500 ~ 5,500 kgs |
Montfort International
G1P 3T3, Canada