LESTHER F2C-460 ACN Column Type Automatic bandsawing Machine

For precise cuts, Montfort offers you its LESTHER F2C-460 ACN, an efficient automatic column type sawing machine with an independent roller feed bed and vice system. Delivered with an automatic chip conveyor.

When considering the purchase of a fully automatic bandsaw, the design and quality of the material feed system is the most important factor, as ultimately the design of the feed system will determine the reliability and accuracy of the cut pieces.

Our LESTHER F2C-460 ACN is equipped with an independent feed vice system. This prevents any contact on the sides of the material, which would have made the cut length accuracy inconsistent.

These independant systems significantly reduces the force required to feed the material.

• Independent feed bed and vice system to provide accurate cutting
• Both rear vice jaws are fitted with retract on the return stroke to allow feeding of deformed or bent meterials and to prevent scoring of material
• The vicejaws are fitted with full stroke cylinders to minimize maintenance
• Split vise clamping system
• P.L.C. control system
• Hydraulic blade tension holds proper tension for cuts and releases it upon shut-off which keeps the blade life
• Variable blade speed control
• Automatic chip conveyor
• Motion detector to shut the machine down in case of blade breakage or jam
• Sawframe is tilted by approximately 2° for easy penetration of sawblade and less burr at end of cut when cutting squares (Optional)
• Digital readout index

• Hydraulic blade tension
• Variable blade speed
• Automatic chip conveyor

• NC control system
• Nesting fixture
• Vise pressure regulator
• Roller table