Imprimer cette page

Scie à ruban verticale semi-automatique à cadre inclinable Amada VT4555M (8-Mark-III)

The Marvel VT4555M (8-Mark-III) is a 5 H.P. semi-automatic vertical tilt-frame sawing machine with a 1-1/4″ blade perfect for metal cutting. This bandsaw has an all-mechanical design, a cast-iron construction and a large adaptable work table.

Features

  • Front Mounted Speed Control : Allows blade speed to be adjusted from the operator’s control station.
  • T-Slotted Work Table : Work area 24.25” x 33” (616 mm x 838 mm); table height 34.5” (876 mm); four machined T-slots accept .625” (15.5 mm) T-Bolts on our VT4555. Work area 24.25” x 33” (616 mm x 838 mm); Table height 38” (965 mm); Two machined T-slots on our VT4555M.
  • 3° Canted Column : Standard 3° forward approach angle for increased efficiency in cutting structural materials.
  • Miter Cutting : Column and blade tilt up to 60° right and left. Optional Powered Tilt is available.
  • Quick Action Vice : Maximum opening 18” (457 mm). Jaws can be shifted to either right or left side of the blade. Jaws are 6” (152 mm) high, 12” (305 mm) wide.
  • Automatic Stops : Adjustable stops can be pre-set to stop advance and return of blade, and also to stop the motor at any location within the 18” (457 mm) travel of the blade.
  • Flushing Hose : Washes chips from hard to get at places reducing clean-up time.
  • Power Chip Brush : Together with blade wipers and flood coolant deep blade teeth free of chips.
  • Eagle Beak VTR Blade : Eagle Beak VTR blade with 3/6 tooth pitch. This is the standard blade that is included with machine purchase.

Technical Specifications

Model VT455M
Imperial Metric
Cutting Capacity (Standard Column with 3° Forward Cant) Round (Diameter) at 0° 17.5″ 445 mm 17.5″
445 mm		 13.0″
330 mm		 14.5″
368 mm		 9.7″
246 mm		 7.3″
185 mm		 17.5″
445 x 558 mm		 17.5″ x 14.5″
445 x 368 mm		 17.5″ x 13.0″
445 x 330 mm		 17.5″ x 9.7″
445 x 246 mm		 17.5″ x 7.3″
445 x 185 mm		 17.5″
445 mm		 17.5″
445 mm
at 45° Right 14.5″ 368 mm
at 45° Left 13.0″ 330 mm
at 60° Right 9.7″ 246 mm
at 60° Left 7.3″ 185 mm
Rectangle (W x H) at 0° 17.5″ 445 x 558 mm
at 45° Right 17.5″ x 14.5″ 445 x 368 mm
Rectangle at 45° Left 17.5″ x 13.0″ 445 x 330 mm
at 60° Right 17.5″ x 9.7″ 445 x 246 mm
at 60° Left 17.5″ x 7.3″ 445 x 185 mm
Maximum Vise Opening at 45° Left 17.5″ 445 mm
at 60° Left 17.5″ 445 mm
Work Load Capacity 4,996 lbs 2,267 kg
Saw Blade Dimensions (L x T x W) 15’4″ x 0.042″ x 1-1/4″ 4674 x 1.1 x 34 mm 15’4″ x 0.042″ x 1-1/4″
4674 x 1.1 x 34 mm		 50-450 ft./min by Inverter
15-137 m/min by Inverter		 Pneumatic (tightening by air ratchet)
Blade Speed 50-450 ft./min by Inverter 15-137 m/min by Inverter
Tension Control Pneumatic (tightening by air ratchet)
Blade Control Cutting Control Clutch Power Feed Clutch Power Feed 0 to 250 lbs
0 to 1112 N
Blade Feed Force 0 to 250 lbs 0 to 1112 N
Motors Saw Blade 5 HP 3.7 kW 5 HP
3.7 kW		 1/4 HP
0.2 kW		 1/8 HP
0.1 kW		 1/15 HP
0.05 kW
Sawhead Fast Feed 1/4 HP 0.2 kW
Cutting Fluid Pump 1/8 HP 0.1 kW
Tilt Gear 1/15 HP 0.05 kW
Power Requirement Power Supply Voltage AC230V±10% or AC460V±10%, 3 PH, 60 Hz Voltage must be specified when ordering AC230V±10% or AC460V±10%, 3 PH, 60 Hz Voltage must be specified when ordering
Power Requirement
Cutting Fluid Tank Capacity 19.8 gal 75 liters 19.8 gal
75 liters		 Electric
Pump Type Electric
Air Supply Air Supply 87-145 psi 0.6-1.0 MPa 87-145 psi
0.6-1.0 MPa		 80 psi
0.55 MPa
Air Set Pressure 80 psi 0.55 MPa
Chip Disposal Manual
Feed Table Feed Mechanism NA NA NA
Feed Stroke NA
Machine Dimensions (W x L x H) 94.7″ x 99.2″ x 90.8″ 2404 x 2518 x 2305 mm
Table Height (Above Floor) 38.0″ 965 mm
Machine Weight 2,867 lbs 1,300 kg
Montfort International
2500 av. Watt, Ville de Québec (Qc),
G1P 3T3, Canada
1-800-463-6668
info@montfort-international.com