| Modèle | VT3850A & VT3850S | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Impérial | Métrique | ||||||||||||||
| Capacité de coupe (Colonne standard avec inclinaison de 3° vers l'avant) | Rond (Diamètre) | at 0° | 14.5″ | 368 mm | 14.5″ 368 mm |
13.5″ 343 mm |
12.75″ 324 mm |
8.75″ 222 mm |
7.75″ 197 mm |
14.50″ x 20.00″ 368 x 508 mm |
14.50″ x 13.50″ 368 x 343 mm |
14.50″ x 12.75″ 368 x 324 mm |
14.50” x 8.75“ 368 x 222 mm |
14.50″ x 7.75″ 368 x 197 mm |
15.25″ 387 mm |
| à 45° à droite | 13.5″ | 343 mm | |||||||||||||
| à 45° à gauche | 12.75″ | 324 mm | |||||||||||||
| à 60° à droite | 8.75″ | 222 mm | |||||||||||||
| à 60° à gauche | 7.75″ | 197 mm | |||||||||||||
| Rectangle (La x H) | à 0° | 14.50″ x 20.00″ | 368 x 508 mm | ||||||||||||
| à 45° à droite | 14.50″ x 13.50″ | 368 x 343 mm | |||||||||||||
| à 45° à gauche | 14.50″ x 12.75″ | 368 x 324 mm | |||||||||||||
| à 60° à droite | 14.50” x 8.75“ | 368 x 222 mm | |||||||||||||
| à 60° à gauche | 14.50″ x 7.75″ | 368 x 197 mm | |||||||||||||
| Ouverture maximale de l'étau | 15.25″ | 387 mm | |||||||||||||
| Capacité de charge de travail | 1,000 lbs | 454 kg | |||||||||||||
| Lame de scie | Dimensions (L x T x W) | 16′ x 0.042″ x 1-1/4″ | 4877 x 1.1 x 34 mm | 16′ x 0.042″ x 1-1/4″ 4877 x 1.1 x 34 mm |
60-400 pied/min par variateur 18-122 m/min par variateur |
Hydraulique | |||||||||
| Vitesse de la lame | 60-400 pied/min par variateur | 18-122 m/min par variateur | |||||||||||||
| Contrôle de la tension | Hydraulique | ||||||||||||||
| Contrôle de la lame | Cutting Control | Direct Force Sensing Electric Ball Screw with PC3 Programmable Control | Direct Force Sensing Electric Ball Screw with PC3 Programmable Control | 0 to 300 lbs 0 to 1334 N |
|||||||||||
| Blade Feed Force | 0 to 300 lbs | 0 to 1334 N | |||||||||||||
| Vise Operation | Type | Main Vise (Optional second vise is available to install) | Main Vise (Optional second vise is available to install) | Hydraulic, Half Stroking with 6.7″ High x 11.4″ Wide 60° Faceplates | |||||||||||
| Control | Hydraulic, Half Stroking with 6.7″ High x 11.4″ Wide 60° Faceplates | ||||||||||||||
| Motors | Lame de scie | 5 HP | 3.7 kW | 5 HP 3.7 kW |
2 HP 1.5 kW |
1/8 HP 0.1 kW |
1/15 HP 0.05 kW |
||||||||
| Hydraulic Pump | 2 HP | 1.5 kW | |||||||||||||
| Cutting Fluid Pump | 1/8 HP | 0.1 kW | |||||||||||||
| Tilt Gear | 1/15 HP | 0.05 kW | |||||||||||||
| Power Requirement | Power Supply Voltage | AC230V±10% or AC460V±10%, 3 PH, 60 Hz Voltage must be specified when ordering | AC230V±10% or AC460V±10%, 3 PH, 60 Hz Voltage must be specified when ordering | ||||||||||||
| Power Requirement | |||||||||||||||
| Cutting Fluid | Tank Capacity | 26.0 gal | 98 liters | 26.0 gal 98 liters |
Electric | ||||||||||
| Pump Type | Electric | ||||||||||||||
| Hydraulic | Tank Capacity | 14.0 gal | 53 liters | 14.0 gal 53 liters |
725 psi 5.0 MPa |
||||||||||
| Pressure Setting | 725 psi | 5.0 MPa | |||||||||||||
| Chip Disposal | Chip Conveyor | ||||||||||||||
| Standard Feed Vise | Index Mechanism | Shuttle Vise | Shuttle Vise | VT3850A: Double Ball Screw by Electrically DrivenVT3850S:AC Servo Motor with Double Ball Screw | 48.0″ 1219 mm |
19″ plus length of parts 482 mm plus length of parts |
|||||||||
| Material Index | VT3850A: Double Ball Screw by Electrically DrivenVT3850S:AC Servo Motor with Double Ball Screw | ||||||||||||||
| Feed Stroke | 48.0″ | 1219 mm | |||||||||||||
| Remnant Length | 19″ plus length of parts | 482 mm plus length of parts | |||||||||||||
| Machine Dimensions (W x L x H) | 158.3″ x 111.8″ x 93.7″ | 4021 x 2839 x 2379 mm | |||||||||||||
| Table Height (Above Floor) | 40.0″ | 1016 mm | |||||||||||||
| Machine Weight | 5,900 lbs | 1,300 kg | |||||||||||||
