| Model | VT5063MW | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Imperial | Metric | ||||||||||
| Cutting Capacity | Round (Diameter) | at 0° | 20.0″ | 508 mm | 20.0″ 508 mm |
17.0″ 432 mm |
11.25″ 286 mm |
20.0″ x 25.0″ 508 x 635 mm |
20.0″ x 17.0″ 508 x 432 mm |
20.0″ x 11.25″ 508 x 286 mm |
20.25″ 514 mm |
| at 45° | 17.0″ | 432 mm | |||||||||
| at 60° | 11.25″ | 286 mm | |||||||||
| Rectangle (W x H) | at 0° | 20.0″ x 25.0″ | 508 x 635 mm | ||||||||
| at 45° | 20.0″ x 17.0″ | 508 x 432 mm | |||||||||
| at 60° | 20.0″ x 11.25″ | 508 x 286 mm | |||||||||
| Maximum Vise Opening | 20.25″ | 514 mm | |||||||||
| Work Load Capacity | 8,000 lbs | 3,628 kg | |||||||||
| Saw Blade | Dimensions (L x T x W) | 18′ 2″ x 0.050″ x 1-1/2″ | 5537 x 1.3 x 41 mm | 18′ 2″ x 0.050″ x 1-1/2″ 5537 x 1.3 x 41 mm |
30-500 ft./min by Inverter 9-152 m/min by Inverter |
Hydraulic | |||||
| Blade Speed | 30-500 ft./min by Inverter | 9-152 m/min by Inverter | |||||||||
| Tension Control | Hydraulic | ||||||||||
| Blade Control | Cutting Control | Direct Force Sensing Electric Ball Screw with PC3 Programmable Control | Direct Force Sensing Electric Ball Screw with PC3 Programmable Control | 0 to 300 lbs 0 to 1334 N |
|||||||
| Blade Feed Force | 0 to 300 lbs | 0 to 1334 N | |||||||||
| Vise Operation | Type | Main Vise (Optional second vise is available to install) | Main Vise (Optional second vise is available to install) | Hydraulic, Full Stroking with 9-12″ High x 15″ Wide 60° Faceplates | |||||||
| Control | Hydraulic, Full Stroking with 9-12″ High x 15″ Wide 60° Faceplates | ||||||||||
| Motors | Saw Blade | 10 HP | 7.4 kW | 10 HP 7.4 kW |
5 HP 3.7 kW |
1/8 HP 0.1 kW |
1/15 HP 0.05 kW |
||||
| Hydraulic Pump | 5 HP | 3.7 kW | |||||||||
| Cutting Fluid Pump | 1/8 HP | 0.1 kW | |||||||||
| Tilt Gear | 1/15 HP | 0.05 kW | |||||||||
| Power Requirement | Power Supply Voltage | AC230V ± 10% or AC460V ± 10%, 3 PH, 60 Hz Voltage must be specified when ordering |
AC230V ± 10% or AC460V ± 10%, 3 PH, 60 Hz Voltage must be specified when ordering |
||||||||
| Power Requirement | |||||||||||
| Cutting Fluid | Tank Capacity | 60 gal | 227 liters | 60 gal 227 liters |
Electric | ||||||
| Pump Type | Electric | ||||||||||
| Hydraulic | Tank Capacity | 10 gal | 38 liters | ||||||||
| Chip Disposal | Manual | ||||||||||
| Machine Dimensions (W x L x H) | 94.7″ x 99.2″ x 90.8″ | 2404 x 2518 x 2305 mm | |||||||||
| Table Height (Above Floor) | 40.0″ | 1016 mm | |||||||||
| Machine Weight | 2,867 lbs | 1,300 kg | |||||||||
