Scie à ruban verticale semi-automatique à cadre inclinable Amada VT4555M (8-Mark-III)

The Marvel VT4555M (8-Mark-III) is a 5 H.P. semi-automatic vertical tilt-frame sawing machine with a 1-1/4″ blade perfect for metal cutting. This bandsaw has an all-mechanical design, a cast-iron construction and a large adaptable work table.

Demande d'information

Une équipe multidisciplinaire pour vous accompagner dans vos projets.

Support après-vente unique

Une qualité inégalée et un produit sur mesure

Catégories : Machines à scier & tronçonner, Scies à ruban verticales

Imprimer en PDF

Envoyer par courriel

            	              		FeaturesFront Mounted Speed Control : Allows blade speed to be adjusted from the operator’s control station.
T-Slotted Work Table : Work area 24.25” x 33” (616 mm x 838 mm); table height 34.5” (876 mm); four machined T-slots accept .625” (15.5 mm) T-Bolts on our VT4555. Work area 24.25” x 33” (616 mm x 838 mm); Table height 38” (965 mm); Two machined T-slots on our VT4555M.
3° Canted Column : Standard 3° forward approach angle for increased efficiency in cutting structural materials.
Miter Cutting : Column and blade tilt up to 60° right and left. Optional Powered Tilt is available.
Quick Action Vice : Maximum opening 18” (457 mm). Jaws can be shifted to either right or left side of the blade. Jaws are 6” (152 mm) high, 12” (305 mm) wide.
Automatic Stops : Adjustable stops can be pre-set to stop advance and return of blade, and also to stop the motor at any location within the 18” (457 mm) travel of the blade.
Flushing Hose : Washes chips from hard to get at places reducing clean-up time.
Power Chip Brush : Together with blade wipers and flood coolant deep blade teeth free of chips.
Eagle Beak VTR Blade : Eagle Beak VTR blade with 3/6 tooth pitch. This is the standard blade that is included with machine purchase.

              	            

            	              		Technical Specifications

Model
VT455M

Imperial
Metric


Cutting Capacity (Standard Column with 3° Forward Cant)
Round (Diameter)
at 0°
17.5″
445 mm
17.5″
445 mm
13.0″
330 mm
14.5″
368 mm
9.7″
246 mm
7.3″
185 mm
17.5″
445 x 558 mm
17.5″ x 14.5″
445 x 368 mm
17.5″ x 13.0″
445 x 330 mm
17.5″ x 9.7″
445 x 246 mm
17.5″ x 7.3″
445 x 185 mm
17.5″
445 mm
17.5″
445 mm

at 45° Right
14.5″
368 mm

at 45° Left
13.0″
330 mm

at 60° Right
9.7″
246 mm

at 60° Left
7.3″
185 mm

Rectangle (W x H)
at 0°
17.5″
445 x 558 mm

at 45° Right
17.5″ x 14.5″
445 x 368 mm

Rectangle at 45° Left
17.5″ x 13.0″
445 x 330 mm

at 60° Right
17.5″ x 9.7″
445 x 246 mm

at 60° Left
17.5″ x 7.3″
445 x 185 mm

Maximum Vise Opening
at 45° Left
17.5″
445 mm

at 60° Left
17.5″
445 mm

Work Load Capacity
4,996 lbs
2,267 kg

Saw Blade
Dimensions (L x T x W)
15’4″ x 0.042″ x 1-1/4″
4674 x 1.1 x 34 mm
15’4″ x 0.042″ x 1-1/4″
4674 x 1.1 x 34 mm
50-450 ft./min by Inverter
15-137 m/min by Inverter
Pneumatic (tightening by air ratchet)

Blade Speed
50-450 ft./min by Inverter
15-137 m/min by Inverter

Tension Control
Pneumatic (tightening by air ratchet)

Blade Control
Cutting Control
Clutch Power Feed
Clutch Power Feed
0 to 250 lbs
0 to 1112 N

Blade Feed Force
0 to 250 lbs
0 to 1112 N

Motors
Saw Blade
5 HP 
3.7 kW
5 HP
3.7 kW
1/4 HP
0.2 kW
1/8 HP
0.1 kW
1/15 HP
0.05 kW

Sawhead Fast Feed
1/4 HP
0.2 kW

Cutting Fluid Pump
1/8 HP
0.1 kW

Tilt Gear
1/15 HP
0.05 kW

Power Requirement
Power Supply Voltage
AC230V±10% or AC460V±10%, 3 PH, 60 Hz Voltage must be specified when ordering
AC230V±10% or AC460V±10%, 3 PH, 60 Hz Voltage must be specified when ordering


Power Requirement


Cutting Fluid
Tank Capacity
19.8 gal
75 liters
19.8 gal
75 liters
Electric

Pump Type
Electric

Air Supply
Air Supply
87-145 psi
0.6-1.0 MPa
87-145 psi
0.6-1.0 MPa
80 psi
0.55 MPa

Air Set Pressure
80 psi
0.55 MPa

Chip Disposal
Manual

Feed Table
Feed Mechanism
NA
NA
NA

Feed Stroke
NA

Machine Dimensions (W x L x H)
94.7″ x 99.2″ x 90.8″
2404 x 2518 x 2305 mm

Table Height (Above Floor)
38.0″
965 mm

Machine Weight
2,867 lbs
1,300 kg


              	            

Machine à scier & tronçonner

Lames & scies-rubans

Lubrifiants industriels & filtration

Équipements de tribofinition & d'ébavurage

Équipements industriels

Sécurité-machines & protection des usines

Scie à ruban verticale semi-automatique à cadre inclinable Amada VT4555M (8-Mark-III)

Features

Technical Specifications

Vous pourriez aimer aussi

Les avantages Montfort

Une équipe multidisciplinaire pour vous accompagner dans vos projets

Une qualité inégalée et un produit sur mesure

Un support après-vente unique et efficace

Model			VT455M
Model			Imperial	Metric
Cutting Capacity (Standard Column with 3° Forward Cant)	Round (Diameter)	at 0°	17.5″	445 mm	17.5″ 445 mm	13.0″ 330 mm	14.5″ 368 mm	9.7″ 246 mm	7.3″ 185 mm	17.5″ 445 x 558 mm	17.5″ x 14.5″ 445 x 368 mm	17.5″ x 13.0″ 445 x 330 mm	17.5″ x 9.7″ 445 x 246 mm	17.5″ x 7.3″ 445 x 185 mm	17.5″ 445 mm	17.5″ 445 mm
		at 45° Right	14.5″	368 mm
		at 45° Left	13.0″	330 mm
		at 60° Right	9.7″	246 mm
		at 60° Left	7.3″	185 mm
	Rectangle (W x H)	at 0°	17.5″	445 x 558 mm
		at 45° Right	17.5″ x 14.5″	445 x 368 mm
		Rectangle at 45° Left	17.5″ x 13.0″	445 x 330 mm
		at 60° Right	17.5″ x 9.7″	445 x 246 mm
		at 60° Left	17.5″ x 7.3″	445 x 185 mm
	Maximum Vise Opening	at 45° Left	17.5″	445 mm
	Maximum Vise Opening	at 60° Left	17.5″	445 mm
Work Load Capacity			4,996 lbs	2,267 kg
Saw Blade	Dimensions (L x T x W)		15’4″ x 0.042″ x 1-1/4″	4674 x 1.1 x 34 mm	15’4″ x 0.042″ x 1-1/4″ 4674 x 1.1 x 34 mm	50-450 ft./min by Inverter 15-137 m/min by Inverter	Pneumatic (tightening by air ratchet)
	Blade Speed		50-450 ft./min by Inverter	15-137 m/min by Inverter
	Tension Control		Pneumatic (tightening by air ratchet)
Blade Control	Cutting Control		Clutch Power Feed		Clutch Power Feed	0 to 250 lbs 0 to 1112 N
Blade Control	Blade Feed Force		0 to 250 lbs	0 to 1112 N
Motors	Saw Blade		5 HP	3.7 kW	5 HP 3.7 kW	1/4 HP 0.2 kW	1/8 HP 0.1 kW	1/15 HP 0.05 kW
	Sawhead Fast Feed		1/4 HP	0.2 kW
	Cutting Fluid Pump		1/8 HP	0.1 kW
	Tilt Gear		1/15 HP	0.05 kW
Power Requirement	Power Supply Voltage		AC230V±10% or AC460V±10%, 3 PH, 60 Hz Voltage must be specified when ordering		AC230V±10% or AC460V±10%, 3 PH, 60 Hz Voltage must be specified when ordering
Power Requirement	Power Requirement
Cutting Fluid	Tank Capacity		19.8 gal	75 liters	19.8 gal 75 liters	Electric
Cutting Fluid	Pump Type		Electric
Air Supply	Air Supply		87-145 psi	0.6-1.0 MPa	87-145 psi 0.6-1.0 MPa	80 psi 0.55 MPa
Air Supply	Air Set Pressure		80 psi	0.55 MPa
Chip Disposal			Manual
Feed Table	Feed Mechanism		NA		NA	NA
Feed Table	Feed Stroke		NA
Machine Dimensions (W x L x H)			94.7″ x 99.2″ x 90.8″	2404 x 2518 x 2305 mm
Table Height (Above Floor)			38.0″	965 mm
Machine Weight			2,867 lbs	1,300 kg