| Power supply | 400 | 50 | 3 | Volt | Hz | Phase |
| Motor power | 1,5 ( 2 ) | kW ( hp ) |
| Motor speed | 2800 | tr/min |
| Acoustic emission | 68 | dB |
| Overall dimension (Width x Depth x Height) | 600 x 600 x H. 1110 | mm |
| Weight standard machine | 85 | kg |
| Bevel dimension (diagonal) | 0 ÷ 6 | mm |
| Bevel angle | 15 ÷ 45 | ° |
| Milling cutter diameter | ø 80 | mm |
| Quantity of widia insert milling cutter | 10 | No. |
| Widia insert type/code | SPUN 12 03 08 | ISO |
| Support table dimension | 100 x 500 | mm |
| Peripheral speed | 12 | m/sec |
Strong base with anti-vibration rubbers at the base and a useful shelf for tools inside.
Low voltage electric controls with padlock device integrated in the main electric switch.
Emergency stop with electronic motor braking with safety anti-reset function.
Rectified and grooved guides with hardening treatment for a prolonged friction resistance.
Axial displacement for full use of the cutting surface of the inserts.
Chamfering guide with index for bevels from 15 ° to 45 °.
Handwheel for chamfer dimension adjustment.
Milleler body complete with 10 tungsten carbide inserts./p>
Two speeds three-phase motor recommended for use with stainless steel and aluminum.Rpm 1400/2800 400 volts - 50 Hz - 3 phase
