| Power supply | 400 | 50 | 3 | Volt | Hz | Phase |
| Motor power | 6,5 ( 8,5 ) | kW ( hp ) |
| Motor speed | 1400 | tr/min |
| Acoustic emission | 75 | dB |
| Overall dimension (Width x Depth x Height) | 930 x 1900 x H. 1360 | mm |
| Weight standard machine | 430 | kg |
| Abrasive belt dimension (wide x length) | 250 x 2500 | mm |
| Peripheral speed | 18 | m/sec |
| Dimension of working plane (behind abrasive belt) | 300 x 460 | mm |
| Driving wheel dimension | ø 250 | mm |
| Pipe diameter | ø 30 ÷ ø 245 | mm |
| Angle of pipe notcher | -30 ÷ 90 ÷ +30 | ° |
Strong base with anti-vibration rubbers at the base and a useful shelf for tools inside.
Low voltage electric controls with padlock device integrated in the main electric switch.
Emergency stop with electronic motor braking with safety anti-reset function.
Vise graduated variable angle with graduated indicator from 30 ° to 90 ° and intermediate positions. Variable angle graduated tube clamping vice with indicator from 30 ° to 90 °. Left and right bidirectional movement. Self-centering vice for round and square tubes.Vice with limit stop device. Side sliding vice for the complete use of the abrasive belt surface.
Carter sander with predisposition connection system.
Rubberized and balanced drive wheel for better drag of the abrasive belt.
Wide horizontal surface for sanding and deburring.
Present behind the sanding belt the canvas graphite to reduce friction and heat development.
Nr. 1 rubberized and grooved contact wheel for the grooving of Ø 5 "pipes.Fast and reliable replacement of wheels and contact rollers thanks to safety screws.Drawings for the construction of the contact rollers included in the instruction and use manual.
Abrasive belt mounted on the machine ready for use.
Dust collection drawer placed under the contact roller.
Transparent protection arrester with friction joint.
