| Power supply | 400 | 50 | 3 | Volt | Hz| Phase |
| Motor power | 1,1 ( 1,5 ) | kW ( hp ) |
| Motor speed | 2800 | tr/min |
| Acoustic emission | 70 | dB |
| Overall dimension (Width x Depth x Height) | 520 x 650 x H. 1500 | mm |
| Weight standard machine | 75 | kg |
| Abrasive belt dimension (wide x length) | 120 x 1500 | mm |
| Peripheral speed | 20 | m/sec |
| Dimension of working plane (behind abrasive belt) | 120 x 450 | mm |
| Driving wheel dimension | ø 135 | mm |
| Orientable belt grinding arm | 0 ÷ 90 | ° |
Strong base with anti-vibration rubbers at the base and a useful shelf for tools inside.
Low voltage electric controls with padlock device integrated in the main electric switch.
Arm sander adjustable from 0 ° to 90 ° and intermediate positions.
Three types of processing, in plan with support, on tyred wheel, on tyred wheel with support.
Behind the abrasive tape has a durable floor in abutment replaceable steel over time.
Rubberized, grooved and balanced drive wheel for better drag of the abrasive belt.
Abrasive belt mounted on the machine ready for use.
Carter sander with predisposition connection system.
DUST EXTRACTOR kit with one suction mouth: complete of dust filter bag in flexible aluminum pipe and hose clamps. The extractor is mounted outside the base and wired to the electrical panel.
Technical features
Single phase motor one speed Rpm 2800 230 volts - 50 Hz - 1 phase
Two speeds single phase motorRpm 1400/2800 230 volts - 50 Hz - 1 phase
Two speeds three-phase motor recommended for use with stainless steel and aluminum.Rpm 1400/2800 400 volts - 50 Hz - 3 phase
Single-phase inverter for electronic regulation of motor revolutions from 300 ÷ 3000 Rpm.The inverter is supplied inside box for the dust protection, which can be controlled with potentiometer and selector of direction of the motor.Motor with maximum power 1,1 kW.
