| Power supply | 400 | 50 | 3 | Volt | Hz | Phase |
| Motor power | 1,1 ( 1,5 ) | kW ( hp ) |
| Motor speed | 2800 | tr/min |
| Acoustic emission | 72 | dB |
| Overall dimension (Width x Depth x Height) | 390 x 760 x H. 710 | mm |
| Weight standard machine | 42 | kg |
| Bevel dimension (diagonal) | 0 ÷ 6 | mm |
| Bevel angle | 15 ÷ 45 | ° |
| Milling cutter diameter | ø 80 | mm |
| Quantity of widia insert milling cutter | 10 | No. |
| Widia insert type/code | SPUN 12 03 08 | ISO |
| Support table dimension | 100 x 500 | mm |
| Peripheral speed | 12 | m/sec |
| Abrasive belt dimension (wide x length) | 50 x 1250 | mm |
| Peripheral speed | 30 | m/sec |
| Dimension of working plane (behind abrasive belt) | 60 x 300 | mm |
| Dimensions of grooved rubberized driving wheel (wide x diameter) | 50 x ø 200 | mm |
| Orientable belt grinding arm | 0 ÷ 90 | ° |
Stable bench structure with anti-vibration rubbers at the base.
Electric controls with emergency stop and anti-reset function for accidental starting and electronic overload protection.
Arm sander adjustable from 0 ° to 90 ° and intermediate positions.
Behind the abrasive tape has a durable floor in abutment replaceable steel over time.
Rubberized, grooved and balanced drive wheel for better drag of the abrasive belt.
Abrasive belt mounted on the machine ready for use.
Carter sander with predisposition connection system.
Rectified and grooved guides with hardening treatment for a prolonged friction resistance.
Axial displacement for full use of the cutting surface of the inserts.
Chamfering guide with index for bevels from 15 ° to 45 °.
Handwheel for chamfer dimension adjustment.
Milleler body complete with 10 tungsten carbide inserts.
STAND WITH DUST EXTRACTOR kit with one suction mouth: complete of dust filter bag in flexible aluminum pipe and hose clamps. The extractor is wired to the electrical panel.TECHNICAL FEATURES- Motor: Volt 400 - Rpm 2800 - kW 0,55- Max flow rate: 1.000 m3 / h- Max total pressure: 85 mm H2O
