Machining centre with mobile upright with vertical spindle and 4 axes with numeric control including the continuous rotation of the vice plane for all angles from -90° to +90°. Complete perimeter casing with shavings collection tray; pneumatically-controlled sliding front side guard. Possibility of machining aluminium, PVC, steel up to 4 mm and stainless steel up to 3 mm with specific accessory.
Machining centre with mobile upright with vertical spindle and 4 axes with numeric control including the continuous rotation of the vice plane for all angles from -90° to +90°. Complete perimeter casing with shavings collection tray; pneumatically-controlled sliding front side guard. Quick manual cone tool change ISO30 with pneumatic control; automatic tool change with optional 5-position magazine. Piece retention with 4 pneumatic clamps with manual positioning, optional pneumatic release. Possibility of machining aluminium, PVC, steel up to 4 mm and stainless steel up to 3 mm with specific accessory.
Three-phase power supply | 380/400-50/60 | Volt-Hz |
Three-phase spindle motor power (26Q ver.) | 1.5 | kW |
Three-phase spindle motor power (30Q ver.) | 2.2 | kW |
Adjustable spindle speed | 1000...12000 | tours/min. |
X - Y – Z axis stroke (26Q version) | 2600-250-200 | mm |
X - Y – Z axis stroke (30Q version) | 3000-250-200 | mm |
A axis tilting degrees | -90‚ +90 | ° |
X axis positioning speed | 25 | m/min. |
Y axis positioning speed | 15 | m/min. |
Z axis positioning speed | 10 | m/min. |
A axis rotation time | -90°...+90° | ° |
Axis positioning tolerance | +/-0.1 | mm |
Clamp capacity (b x h) | 160x120 | mm |
Max cutter diameter | 10 | mm |
PWeight (26Q - 30Q version) | 1450-1550 | kg |