Manually-operated single-head copy router, pneumatic head downward movement locking and side movement by means of indirect lever. Possibility of working steel up to 3 mm with standard fittings; with specific accessory stainless steel up to 2 mm. Spindle rotation speed adjustable with electronic speed variator to improve milling quality and extend tool life. Tracer point with 6 adjustable settings permits quick and precise machine positioning. The clamp plane rotation system (patented) permits machining 4 sides of the profile section without releasing the clamps. The rotary movement from 0° to 180° maintains the same axis; the figure produced on the first side at 0° is at the same height as that reproduced on the opposite side at 180°.This system permits increasing work speed and precision, using shorter tools, eliminating through operations and therefore reducing vibrations and noise. Work area front guard with pneumatic control.
| Three-phase power supply | 380/400-50/60 | Volt-Hz |
| Three-phase motor power | 1.1 | kW |
| Adjustable spindle speed | 1000...12000 | rpm |
| X - Y - Z axis stroke | 360-150-140 | mm |
| Clamp capacity (b x h) | 150x100 | mm |
| Max cutter diameter | 12 | mm |
| Tracer tip diameters | 5-8-10 | mm |
| Weight | 400 | kg |
