The single-phase electric sump cleaner Sump Shark SE 10 works conveniently wherever there are standard power outlets and effectively filter the solids.
Ditch the grueling pail-n-shovel process! Clean dirty machine tool sumps faster, better and safer. Effectively filter the solids (chips, swarf and sludge) from expensive industrial fluids (a.k.a. coolant, metalworking fluids, cutting fluids, etc.) for re-use (when applicable). Reduce machine downtime, labor costs and mess. Save time and money. The single-phase electric sump cleaner Sump Shark SE 10 works conveniently wherever there are standard power outlets.
| Tank Size | 90-, 140-, 175-, 300-, 400-, 500- and 600-gallon capacity |
| Motor | 1 HP Electric Motor • Volts 115 Amps 13.4 • Hertz 60 • Phase 1 |
| Pump | Rotary, vane-type vacuum pump |
| Pumping Rate | Up to 60 gallons (227 liters) per minute |
| Suction Lift | 17” Hg (Mercury) or 231” (6 meters) water |
| Filter | F10 Filter (1 cu. ft. capacity) is standard. Optional F23 (2.3 cu. ft. capacity) is recommended when coolant is loaded with chips and swarf. Coarse, regular and fine weaves available. |
| Overfill Prevention | Automatic overfill protection, all discharge ports are valved |
| Pressure Discharge | 6 PSI (pounds per square inch) with safety backup valve |
| Hoses | 1 1/2” I.D. x 16’ oil-resistant PVC suction/discharge hose including quick-disconnect coupler and suction tools |
| Accessories |
|
| Model | Tank Size | Cleanout Door | Transport Base | Wheels | Dimensions (L x W x H) | Shipping Weight |
|---|---|---|---|---|---|---|
| SE10-90PT | 341 L(90 gal) | 20,3 x 25,4 cm (8” x 10”) door with a 1-1/4” drain port | Standard: PT Base (Push/Tow) Available: PL6, TW, CB | Poly tires: two 30,5 x 7,6 cm (12” x 3”), one 20,3 x 7,6 cm (8” x 3”) swivel caster | 172,7 x 76,2 x 121,9 cm | 294 kg |
| SE10-140PT | 530 L(140 gal) | 20,3 x 25,4 cm (8” x 10”) door with a 1-1/4” drain port | Standard: PT Base (Push/Tow) Available: PL6, TW, CB | Poly tires: two 30,5 x 7,6 cm (12” x 3”), one 20,3 x 7,6 cm (8” x 3”) swivel caster | 172,7 x 86,4 x 137,2 cm | 312 kg |
| SE10-175PT | 662 L(175 gal) | 20,3 x 25,4 cm (8” x 10”) door with a 1-1/4” drain port | Standard: PT Base (Push/Tow) Available: PL6, TW, CB | Poly tires: two 30,5 x 7,6 cm (12” x 3”), one 20,3 x 7,6 cm (8” x 3”) swivel caster | 203,2 x 86,4 x 137,2 cm | 365 kg |
| SE10-300TW | 1 136 L(300 gal) | 40,6 cm (16”) diameter hinged door with a 2½" drain port. | Standard: TW Base (Tow-Only) Tow bar with pintle-eye hitch to accommodate most in-plant tugs or tractors Available: CB |
Rubber tires: two 40,6 x 10,2 cm (16” x 4”), one 30,5 x 7,6 cm (12” x 3”) swivel caster | 243,8 x 101,6 x 157,5 cm | 491 kg |
| SE10-400TW | 1 514 l (400 gal.) | 40,6 cm (16”) diameter hinged door with a 2½" drain port. | Standard: TW Base (Tow-Only) Tow bar with pintle-eye hitch to accommodate most in-plant tugs or tractors Available: CB |
Rubber tires: two 40,6 x 10,2 cm (16” x 4”), two 30,5 x 7,6 cm (12” x 3”) swivel casters | 251,5 x 116,8 x 172,7 cm | 675 kg |
| SE10-500TW | 1 893 L(500 gal) | 40,6 cm (16”) diameter hinged door with a 2½" drain port. | Standard: TW Base (Tow-Only) Tow bar with pintle-eye hitch to accommodate most in-plant tugs or tractors Available: CB |
Rubber tires: two 40,6 x 12,7 cm (16” x 5”), two 30,5 x 7,6 cm (12” x 3”) swivel casters | 281,9 x 121,9 x 177,8 cm | 681 kg |
| SE10-500TW | 2 271 L(600 gal) | 40,6 cm (16”) diameter hinged door with a 2½" drain port. | Standard: CB (Custom Base) for mounting on trailer or truck | N/A | 307,3 x 106,7 x 152,4 cm | 756 kg |
