| Power supply | 400 | 50 | 3 | Volt | Hz | Phase |
| Motor power | 0,85 - 0,65 ( 1,15 - 0,9 ) | kW ( hp ) |
| Motor speed | 2800 - 1400 | tr/min |
| Acoustic emission | 70 | dB |
| Overall dimension (Width x Depth x Height) | 600 x 700 x H. 1400 | mm |
| Weight standard machine | 100 | kg |
| Abrasive belt dimension (wide x length) | 25 ÷ 40 x 1700 | mm |
| Peripheral speed | 18 - 9 | m/sec |
| Dimension of working plane (behind abrasive belt) | 25 - 40 x 395 | mm |
| Driving wheel dimension | ø 120 | mm |
| Orientable belt grinding arm | 0 | ° |
| Support table dimension | 280 x 300 | mm |
| Support table revolution | - 20 ÷ + 60 | ° |
DUST EXTRACTOR kit with one suction mouth: complete of dust filter bag in flexible aluminum pipe and hose clamps. The extractor is mounted inside the base and wired to the electrical panel.
TECHNICAL FEATURES
Single-phase inverter for electronic regulation of motor revolutions from 300 ÷ 3000 Rpm.The inverter is supplied inside box for the dust protection, which can be controlled with potentiometer and selector of direction of the motor.Motor with maximum power 1,1 kW.
Three-phase inverter for the electronic adjustment of moto from rpm 300 ÷ 3000 Rpm. The inverter is provided on a separate stand, inside in a dust seal box, external display for the reading of the revolutions of the nominal speed. The speed of the motor is controlled on switch boar of the machine. Motor with maximum power 2,2 kW. Notes: The inverter is dedicated to a single motor control.
TECHNICAL FEATURES
