| Power supply | 400 | 50 | 3 | Volt | Hz | Phase |
| Motor power | (2x) 0,75 ( 1,0 ) | kW ( hp ) |
| Motor speed | 1400 | tr/min |
| Acoustic emission | 70 | dB |
| Overall dimension (Width x Depth x Height) | 1000 x 700 x H. 1200 | mm |
| Weight standard machine | 140 | kg |
| Workpiece thickness allowed | 1 ÷ 4 | mm |
| Support table dimension | 120 x 1000 | mm |
| Workpiece width allowed | 50 | mm |
| Brush maximum external size | ø 250 | mm |
| Brush maximum wide size | 50 | mm |
| Brush minimum hole size | 100 | mm |
| Peripheral speed of brush | 18 | m/sec |
| Quantity of brush | 2 | No. |
Strong base with anti-vibration rubbers at the base and a useful shelf for tools inside.
Low voltage electric controls with padlock device integrated in the main electric switch.
Emergency stop with electronic motor braking with safety anti-reset function.
Guides hardened, cemented, grinded and grooved for a prolonged resistance to attrition.
Support removable floor plate.
Sheet thickness adjustment handwheel.
Deburring of the sheet above and below in a single pass.Axial displacement of the flap brushes for the full utilization of the abrasive surface.
Two lamellar abrasive wheels mounted on the machine ready for use.
Locking and reducing steel flange for brush, flap wheel with spacers and clamping nuts.
Carter sander with predisposition connection system.
DUST EXTRACTOR kit with one suction mouth: complete of dust filter bag in flexible aluminum pipe and hose clamps. The extractor is mounted inside the base and wired to the electrical panel.
TECHNICAL FEATURES
