| Power supply | 400 | 50 | 3 | Volt | Hz | Phase |
| Motor power | 3 (4) | kW ( hp ) |
| Motor speed | 2800 | tr/min |
| Acoustic emission | 70 | dB |
| Overall dimension (Width x Depth x Height) | 650 X 1500 X 1040 | mm |
| Weight standard machine | 125 | kg |
| Abrasive belt dimension (wide x length) | 75 x 2000 | mm |
| Peripheral speed | 30 | m/sec |
| Dimension of working plane (behind abrasive belt) | 75x400 | mm |
| Driving wheel dimension | ø 200 | mm |
| Pipe diameter | ø 20 ÷ ø 70 | mm |
| Angle of pipe notcher | + 90 ÷ +30 | ° |
Strong base with anti-vibration rubbers at the base and a useful shelf for tools inside.
Low voltage electric controls with padlock device integrated in the main electric switch.
Variable angle graduated tube clamping vice with indicator from 30 ° to 90 °.Self-centering vice for round and square tubes.Vice with limit stop device.Side sliding vice for the complete use of the abrasive belt surface.
Orientable support surface for working in support near the front contact wheel.
Present behind the sanding belt the canvas graphite to reduce friction and heat development.
Nr. 1 contact roller for notching pipes from Ø 1 1/4".Fast and reliable replacement of contact rollers thanks to safety screws.Drawings for the construction of the contact rollers included in the instruction and use manual.
Abrasive belt mounted on the machine ready for use.
Dust collection drawer placed under the contact roller.
Transparent protection arrester with friction joint.
Carter sander with predisposition connection system.
STAND WITH DUST EXTRACTOR kit with one suction mouth: complete of dust filter bag in flexible aluminum pipe and hose clamps. The extractor is wired to the electrical panel.
TECHNICAL FEATURES
Two speeds three-phase motor recommended for use with stainless steel and aluminum.
Rpm 1400/2800 400 volts - 50 Hz - 3 phase
