LESTHER J-T1 NC Horizontal Panel Cutting Machine for Aluminium

The 12-foot automatic cutting machine is equipped with chip collector, automatic feeding and automatic cutting. The saw shaft is raised horizontally. The inverter can adjust the saw speed and the RPM. The sawblade advances by the servo to drive the gear rock. The cutting width can be adjusted according to the operation screen. The saw seat is positioned to adopt the roller needle bearing, which is stable and has low friction and smooth running. This design is superior compared to the cylinder and hydraulic system, T1 design can avoid the unsatisfactory operation situation. The feeding can be quickly retracted after sawing and save processing time.

• Cutting length : width 3700mm * length 3700mm (max: 3700MM, min 20MM)
• The PLC control and optional CVS system can connect to your office computer, letting you set the cutting size directly from your office
• The piano cover and outside cover offer double protection. They can collect the chip well, and make the cutting process safer
• Cutting thickness : equipped with the inverter, can put the sawblade from 455-660, please select the sawblade dependent on the material thickness, and adjust the suitable RPM can save the material, machine can cut the thickness200mm (equipped with the 24" sawblade, for the thickness 174 mm).
• Equipped sawblade : ø610mm
• Spindle : 30 mm
• RPM : 2800 RPM (with inverter, can adjust the RPM)
• Saw shaft speed : Stepless speed change (driven by servo motor)
• Saw shaft backward speed : 60 M / min
• Main blade drive motor : 40HP, with 416mm large drive motor swing arm shaft, main saw motor drive adopts timing belt to enhance the transmission horsepower and long-term durability of the mechanism (suitable for long-term thick material setting)
• Automatic feeding length 3700mm and automatic clamping fixture : 12 seats (automatic feeding stroke 3.7 meter ) to the big thick material feeding, the roller 100mm ,which suitable for the thick material, feeding support 1.5 m * 4 seats
• Saw with inverter, and the cooling system
• Patented design : under the saw blade with crawler-type automatic chip collecting system, and the width is increased to 250mm, automatic transfer of aluminum chips and high-efficiency chip collector, to avoid the chip plugging and the cleaning issue
• Special design : double gear rock clamping, can clamp the material and enhanced the cutting accuracy, to avoid the material moving while cutting (especially for the thick material)
• Pearl plate at the working table
• Sawblade speed : 1~7m
• Patented design : double gear rock for the automatic feeding ( push) and the feeding servo:3.5kw(max:2000kgs material) , this design can control by the servo motor, can adjust the feeding accuracy, balance the feeding power

• CE Standard
• Infeed, Outfeed Roller Table
• Chip Collector
• Hydraulic Clamping
• Saw Blade