An important function of sump cleaning is the ability to remove solids from industrial fluids: coolant, metalworking fluids, cutting fluids, etc during the pump in operation. As our Sump Shark® sump cleaners suctions out fluids and solids, CECOR’s patented filter system removes the chips, swarf and other residue from the fluids.
When evaluating different manufacturers’ sump cleaners and filtering, be sure to compare apples to apples. Effective filtering is a complex process. Just shopping the “lowest micron filter” is not the right strategy. Too fine of a filter in the wrong application can reduce pumping flow, and could stop flow altogether.
Most manufacturers use a nominal rating to measure a filter’s efficiency, which indicates the removal of a certain percentage of particles of a certain micron size (i.e. 60% of 25 micron particles). If percentage & particle size are not presented together then the nominal rating is meaningless.
CECOR has innovated an effective filter that is based on filter pore size (absolute rating). Our filter system can actually filter particles much smaller due to the “cake”. The “cake” builds up on the filter as dirty coolant passes through the it. The “cake” makes the filter more efficient allowing it to trap even finer particles. Therefore, depending on your application, our absolute 99% efficient 500 micron bag could also be 80% efficient removing 20 micron particles, thus also being considered a nominal 20 micron filter.
CECOR’s patented reverse-taper design eliminates bridging. The filter empties completely. Solids do not become trapped in the filter. CECOR’s unique filter pack design provides a continuous filter medium. All of the fluids must pass through the filter with none escaping through slits or openings. Other design advantages include a built-in lifting bail, a filter lid that retains the filter, and thick ½” (12.7 mm) gaskets enclosing the filter. CECOR’s filter consists of a metal assembly with a perforated basket that holds the filter bag/sleeve. The filter bags and sleeves are available in a variety of sizes, materials and weaves to suit your application.
CECOR’s filter will empty completely at dumping time. Our patented reverse-taper design eliminates bridging. Bridging is when solids get trapped in the filter so it will not empty properly. Many chips are either heavy, sharp or both. If bridging occurs there could easily be a potential hazard when you employee tries to break the bridge to get the chips to drop out of the bottom of the filter.
CECOR’s patented reverse-taper design eliminates bridging and empties completely. (Bridging is when solids get trapped in the filter so it does not empty properly. This can be considered a safety hazard if the chips are heavy, sharp or some other hazard.) Solids do not become trapped in the filter. CECOR’s unique filter pack design provides a continuous filter medium. All of the fluids must pass through the filter with none escaping through slits or openings.
Other design advantages include a built-in lifting bail, a filter lid that retains the filter, and thick ½” (12.7 mm) gaskets enclosing the filter. CECOR’s filter consists of a metal assembly with a perforated basket that holds the filter bag/sleeve. The filter bags and sleeves are available in a variety of sizes, materials and weaves to suit your application.
The F10 filter has a capacity of 1 cubic foot in the strainer basket with dimensions of 15-1/2″ long and 14″ diameter. The F10 filter is standard on the following series: SA5, SE10, CA5 and CE10.
Capacity : 0,03 m³
The F23 filter has 2.3 cu. ft. capacity with a top dimensions of 9-1/2″ and 13-3/8″ at the bottom. The greater bottom dimension is due to our safety features; the CECOR patented compound linkage & rotary latch allows you to safely dump the filter from the bottom. The F23 filter is fitted for fork lift or hook hoist handling.
Capacity : 0,06 m³
The F50 filter has 5.0 cubic foot capacity and dimensions of 16-3/8″ at the top and 20-3/8″ at the bottom. The greater bottom dimension is due to our safety features; the CECOR patented compound linkage & rotary latch allows you to safely dump the filter from the bottom. The F50 filter has a perforated metal outer basket and the fork lift handle is an integral to the two-piece cover.
Capacity : 0,14 m³
