


The Uni-Roller® S2 lubricator is the ultimate solution for continuous stock lubrication. Combined with a SmartFlow® programmable fluid controller, the Uni-Roller® S2 will consistently apply the correct amount of fluid to both the top and bottom of your coil, day after day.

Ensures even and consistent coating on one or both sides of stock

Designed to withstand the harshest industrial conditions

Roller cover replacements take minutes to swap in

Choose from polyurethane foam or polyester felt roller covers

Choose between a low volume or standard dispenser tube

Solenoid or manual valve control

Single or double pneumatic air cylinders for maintaining pressure on stock

Provides an input signal to a SmartFlow® controller based on roller rotation. Select when an intermittent signal from press is not available

Stock applicators require a pressurized fluid supply. We offer a range of options for size and configuration.

Provides a SmartFlow® alarm to alert operators of roller air supply issues, helping prevent missed lubrication and improve process reliability.
The Uni-Roller® S2 is modular in design. A single roller set is used for widths of 18” [457.2 mm] or less. For stock over 18” [457.2 mm] wide, multiple 12” [304.8 mm] wide roller sets are staggered and overlapped. Standard sizes are available to accommodate common stock widths, with custom sizes available on request.
The internally-supplied rollers are essential to precisely applying the fluid. Inside each of the rollers is a dispenser tube with small holes placed along its length. Fluid is injected into the dispenser tubes from the fluid controller and dispensed across the inside of the rollers. The lubricant is transferred to the stock through durable polyester felt or polyurethane foam roller covers. These cover materials apply the lubricant smoothly and evenly across both the top and bottom of the stock.
The Uni-Roller® S2 Powered applies the exact amount of lubricant required. This eliminates the mess and waste associated with in-die spray systems and externally lubricated roller systems. The result is not only a cleaner shop, but also significant savings from decreased fluid waste, improved die life, better part quality and increased machine up-time. Many customers have reported savings resulting in a return on investment of less than six months!

The brushed stainless steel guards protect the rollers and guide material when loading coil stock or feeding blanks. With the guards removed for better access, a roller can be changed in about a minute using a single wrench. The Uni-Roller® S2 is built to handle any manufacturing environment without sacrificing ease of maintenance.

| Roller coverage | A (extrusion length | B (overall width) |
|---|---|---|
| 3” [76.2 mm] | 12” [304.8 mm] | 13.13” [333.5 mm] |
| 6” [152.4 mm] | 12” [304.8 mm] | 13.13” [333.5 mm] |
| 12” [304.8 mm] | 18” [457.2 mm] | 19.13” [485.9 mm] |
| 18” [457.2 mm] | 24” [609.6 mm] | 25.13” [638.3 mm] |
*On units with double air cylinders add 1.40” [35.6 mm] to the pass line and overall height.
| Roller coverage | A (extrusion length) | B (overall width) |
|---|---|---|
| 23” [596.9 mm] | 30” [762 mm] | 34.16” [867.75 mm] |
| 35” [889 mm] | 42” [1066.8 mm] | 46.16” [1172.5 mm] |
| 46.5” [1181.1 mm] | 54” [1371.6 mm] | 58.16” [1477.3 mm] |
| 58” [1473.2 mm] | 66” [1676.4 mm] | 70.16” [1782.1 mm] |
| 69.5” [1765.3 mm] | 78” [1981.2 mm] | 82.16” [2086.9 mm] |
*On units with double air cylinders add 1.40” [35.6 mm] to the pass line and overall height.

| Stock type | Coil stock |
| Stock thickness | .005"-.25" (.13mm – 6.35mm) |
| Stock width | 3" - 96" (76mm - 2438mm) Contact us for other sizes |
| Line Speed | 100-1000 ft/min (30-305 m/min) |
| Fluid type | For use with a broad range of water soluble and neat lubricants. Viscosity from 30 – 1000 SUS. Thicker lubricants can be tested by Unist for compatibility |
| Fluid supply | Pressurized 4 gal (15L) Pressurized 6 gal (22.7L) Pressurized 15 gal (56.8L) Pressurized 30 gal (113.6L) 20 gal (75.7L) polyethylene tank with diaphragm pump Integration into customer’s bulk fluid system |
| Applicator material | Polyester felt or polyurethane foam |
| Controller | Smartflow® or Duo™ controller |
| Power | N/A (See Smartflow® or Duo™ controller requirements) |
| Mounting | 5/16-18 t-nuts supplied in bottom extrusion slots allow for multiple mounting options. 2 t-nuts per slot provided. |
| Air | Clean, dry, compressed air, 80-100 psi (5.5-6.9 bar),10 SCFM (280 SLPM) minimum |