The UNIST TSL is a lubrication system designed to apply a thin, consistent coating of lubricant to thin-gauge metal coil stock. Particularly suited for stamping operations and heat exchanger fin manufacturing, it provides controlled lubrication on both sides of the material while reducing lubricant consumption and protecting production tooling.
Featuring specialized felt applicators and the programmable SmartFlow® controller, the TSL delivers precise and consistent lubricant application according to the requirements of each operation. Its rugged design, adjustable pneumatic cylinders, and multiple width configurations allow for easy integration into industrial production lines.
Heat exchange manufacturers know that lubrication is a critical factor that can help ensure productivity in fin making operations.
As a world leader in the design and manufacture of fluid dispensing solutions, Unist surpasses the demands of the HVAC industry by providing lubrication solutions that improve efficiency and productivity.
The UNIST TSL™ system uses specially designed felt applicators to apply a thin coating of lubricant to both sides of the metal stock.
Capable of applying lubricant coatings as low as 269 mg/m² (25 mg/ft²), it provides precise and consistent fluid application to protect tooling and minimize lubricant waste.
Combined with the SmartFlow® controller, the system allows lubricant application to be adjusted to the requirements of stamping and heat exchanger fin manufacturing operations.
The TSLTM by Unist is the ideal solution for precisely and accurately applying fin stamping fluids. The robust applicator utilizes specially engineered felt applicators to wipe a thin film of lubricant onto the stock material - top and bottom.
With fluid
supplied by the SmartFlow® fluid controller, the TSLTM allows manufacturers to program the exact amount of oil needed to run the fin press at peak performance while providing maximum protection to the tooling. With proven success on hundreds of fin presses around the world, the TSLTM is the ultimate option for lubricating fin stock.
Built to withstand industrial facility conditions
Easily mount to press-lines or fixtures
Wiper and applicator pads last twice as long
Change out applicator pads in minutes
Easily adjust for stock thickness or pull resistance
| Technical Specifications | UNIST TSL |
|---|---|
| Stock type | Thin gauge coil stock |
| Stock thickness | .002" - 0.10" (.05mm - .25mm) |
| Stock width | 9" - 45" (228mm - 1143mm) |
| Line speed | 100 ft/min (30 m/min) |
| Fluid type(s) | For use with vanishing fluid or low viscosity oil (oils from 30 SUS to 150 SUS). Not designed for use with water soluble lubricants. |
| Fluid supply | Pressurized 15, 22.7, 56.8 or 113.6 L 75.7 L polyethylene tank with diaphragm pump Integration into customer’s bulk fluid system |
| Applicator material | Wool felt |
| Controller | SmartFlow |
| Power | NA (see Smartflow® requirements) |
