Amada HA400W Horizontal Scissor Style Automatic Bandsawing Machine

Name: Machine à scier automatique à bras articulé Amada HA400W
Brand: Amada

Robust HA400W horizontal scissor style bandsaw offering exceptional accuracy with extremely rigid construction for large capacity cutting of all types of metals. 7.5 HP fully automatic sawing machine with a 1-1/2″ blade, 9 times multi-index, index floating vise, kerf compensating dial, variable blade speed drive and full stroke vise.

The HA400W feature “C” section frames that carry the mountings for the two band wheels, heavy-duty worm gear drive reducer, blade drive motor, and saw guide arm mounting supports. The result is an extremely rigid structure that delivers efficiency, economy, and large-capacity cutting for all types of metals.

Quote request

A multidisciplinary team to accompany you in your projects

A remarkable After-Sales Support

Unrivaled quality and a customized product

Categories: Sawing & Cutting Machines, Automatic Bandsaws

Print in PDF

Send by email

            	              		FeaturesSaw Head Frame : The rigid ‘C’ section frame carries the mountings for the two band wheels, heavy-duty worm drive gear reducer, the band drive motor, and saw guide arm mounting supports.
Band Wheels & Drive System : The band wheels are cast iron for long, productive life. The deflection free 9.4 inch (240 mm.) wheel hubs ensure the wheels run true regardless of tension stress or cutting loads. The spindle assemblies incorporate tapered roller bearings for greater rigidity and long service life. The drive motor is coupled to the transmission through a variable speed pulley.
Drive Wheel Transmission : The drive wheel transmission is designed and built by Amada to provide high efficiency speed reduction, which requires no external cooling, to deliver more power to the large diameter drive shaft. This shaft ensures that this developed torque is transferred to the blade with no strobing, enabling the machine to efficiently cut high alloys as well as free machining materials.
Pressure/Flow Feed Control : The independent pressure and flow controls in series ensure the optimum cutting rate can be obtained regardless of section or alloy being cut. The pressure control determines the cutting force applied to the blade and the flow control sets the maximum fall rate of the head. For example for difficult to machine materials the pressure is set higher than free machining alloys and the flow is set lower, as shown on the escutcheons above the above the control knobs.
Automatic, Powered Chip Conveyor : The electrically powered chip conveyor auger automatically removes the saw chips from the saw while draining the cutting fluid back into the fluid reservoir. The automatic chip conveyor greatly reduces cleanup time and enables the machine to run longer without operator cleanup.
Multiple Index : The machine control has the capability to make up to 9 index passes giving a maximum cut length of 141.7 in. (3,600 mm.) in automatic.

              	            

            	              		Technical Specifications

Model
HA400W

Imperial
Metric


Cutting Capacity
Round (Diameter)
1.18″ – 16.54″
30 – 420 mm
1.18″ – 16.54″
30 – 420 mm
17.0″
432 mm

Rectangle (W x H)
16.3″ x 16.3″
415 x 415 mm

Work Load Capacity
5,511 lbs.
2,500 kg

Saw Blade
Blade Size (L x T x W)
15′ x 0.050″ x 1-1/2″
4570 x 1.3 x 41 mm
15′ x 0.050″ x 1-1/2″
4570 x 1.3 x 41 mm
56-295 ft./min, 60 Hz Stepless
17-90 m/min, 60 Hz Stepless


Blade Speed
56-295 ft./min, 60 Hz Stepless
17-90 m/min, 60 Hz Stepless

Tension Control



Blade Control
Cutting Control
Hydraulic Pressure-Flow Control Valve
Hydraulic Pressure-Flow Control Valve
Automatic Setting with Quick Approach Feeler

Top Limit Setting
Automatic Setting with Quick Approach Feeler

Vise Operation
Type
Main and Rear Vises
Main and Rear Vises
Hydraulic Full-Stroke Cylinder

Control
Hydraulic Full-Stroke Cylinder

Motors
Saw Blade
7.5 HP
5.5 kW
7.5 HP
5.5 kW
2 HP
1.5 kW
1/4 HP
0.18 kW

Hydraulic Pump
2 HP
1.5 kW

Cutting Fluid Pump
1/4 HP
0.18 kW

Power Requirement
Power Supply Voltage
AC220V±10%, 3 PH, 60 Hz or AC440V±10%, 3 PH, 60 Hz
AC220V±10%, 3 PH, 60 Hz or AC440V±10%, 3 PH, 60 Hz
11 kVA

Power Requirement
11 kVA

Cutting Fluid
Tank Capacity
31.5 gal
120 liters
31.5 gal
120 liters
Centrifugal Electric 
10.6 gal/min
40 L/min

Pump Type
Centrifugal Electric 

Pump Capacity
10.6 gal/min
40 L/min

Hydraulic
Tank Capacity
10.5 gal
40 liters
10.5 gal
40 liters
Variable Discharge Vane Pump
5.8 gal/min
22 L/min
498 psi
3.5 MPa (58 kgf/cm2)

Pump Type
Variable Discharge Vane Pump

Pump Capacity
5.8 gal/min
22 L/min

Pressure Setting
498 psi
3.5 MPa (58 kgf/cm2)

Chip Disposal
Automatic Follow up Double Wire Brush with Wear Detection.
Motor-Driven wide Scraper Type Chip Conveyor
Automatic Follow up Double Wire Brush with Wear Detection.
Motor-Driven wide Scraper Type Chip Conveyor

Material Index
Index Mechanism
AC Servo Motor
AC Servo Motor
19.6″ (Maximum 9 times index)
500 mm (Maximum 9 times index)
0.394″-177″
10.0-4500 mm
1
1-9999
3″ Plus Length of Parts
76 mm Plus Length of Parts

Stroke
19.6″ (Maximum 9 times index)
500 mm (Maximum 9 times index)

Length
0.394″-177″
10.0-4500 mm

Number of Input Station
1

Number of Cut-Off Pieces
1-9999

Remnant Length
3″ Plus Length of Parts
76 mm Plus Length of Parts

Machine Dimensions (W x L x H)
Head-Up Position
89.5″ x 106.2″ x 95.5″
2274 x 2697 x 2425 mm
89.5″ x 106.2″ x 95.5″
2274 x 2697 x 2425 mm
89.5″ x 106.2″ x 62.0″
2274 x 2697 x 1575 mm

Head Down Position
89.5″ x 106.2″ x 62.0″
2274 x 2697 x 1575 mm

Table Height
32.5″
800 mm
32.5″
800 mm

Machine Weight
4,851lbs
2,200 kg
4,851lbs
2,200 kg


              	            

Sawing & Cutting Machines

Blades & Band Saws

Industrial Lubricants & Filtration

Tribofinishing & Deburring Machines

Machining Centers & Industrial Equipment

Machine Safeguarding & Modular Machine Guards

Amada HA400W Horizontal Scissor Style Automatic Bandsawing Machine

Features

Technical Specifications

You May Also Like

The Montfort Benefits

A multidisciplinary team to accompany you in your projects

Unrivaled quality and a customized product

A remarkable After-Sales Support

Model		HA400W
Model		Imperial	Metric
Cutting Capacity	Round (Diameter)	1.18″ – 16.54″	30 – 420 mm	1.18″ – 16.54″ 30 – 420 mm	17.0″ 432 mm
Cutting Capacity	Rectangle (W x H)	16.3″ x 16.3″	415 x 415 mm
Work Load Capacity		5,511 lbs.	2,500 kg
Saw Blade	Blade Size (L x T x W)	15′ x 0.050″ x 1-1/2″	4570 x 1.3 x 41 mm	15′ x 0.050″ x 1-1/2″ 4570 x 1.3 x 41 mm	56-295 ft./min, 60 Hz Stepless 17-90 m/min, 60 Hz Stepless
	Blade Speed	56-295 ft./min, 60 Hz Stepless	17-90 m/min, 60 Hz Stepless
	Tension Control
Blade Control	Cutting Control	Hydraulic Pressure-Flow Control Valve		Hydraulic Pressure-Flow Control Valve	Automatic Setting with Quick Approach Feeler
Blade Control	Top Limit Setting	Automatic Setting with Quick Approach Feeler
Vise Operation	Type	Main and Rear Vises		Main and Rear Vises	Hydraulic Full-Stroke Cylinder
Vise Operation	Control	Hydraulic Full-Stroke Cylinder
Motors	Saw Blade	7.5 HP	5.5 kW	7.5 HP 5.5 kW	2 HP 1.5 kW	1/4 HP 0.18 kW
	Hydraulic Pump	2 HP	1.5 kW
	Cutting Fluid Pump	1/4 HP	0.18 kW
Power Requirement	Power Supply Voltage	AC220V±10%, 3 PH, 60 Hz or AC440V±10%, 3 PH, 60 Hz		AC220V±10%, 3 PH, 60 Hz or AC440V±10%, 3 PH, 60 Hz	11 kVA
Power Requirement	Power Requirement	11 kVA
Cutting Fluid	Tank Capacity	31.5 gal	120 liters	31.5 gal 120 liters	Centrifugal Electric	10.6 gal/min 40 L/min
	Pump Type	Centrifugal Electric
	Pump Capacity	10.6 gal/min	40 L/min
Hydraulic	Tank Capacity	10.5 gal	40 liters	10.5 gal 40 liters	Variable Discharge Vane Pump	5.8 gal/min 22 L/min	498 psi 3.5 MPa (58 kgf/cm2)
	Pump Type	Variable Discharge Vane Pump
	Pump Capacity	5.8 gal/min	22 L/min
	Pressure Setting	498 psi	3.5 MPa (58 kgf/cm2)
Chip Disposal		Automatic Follow up Double Wire Brush with Wear Detection. Motor-Driven wide Scraper Type Chip Conveyor		Automatic Follow up Double Wire Brush with Wear Detection. Motor-Driven wide Scraper Type Chip Conveyor
Material Index	Index Mechanism	AC Servo Motor		AC Servo Motor	19.6″ (Maximum 9 times index) 500 mm (Maximum 9 times index)	0.394″-177″ 10.0-4500 mm	1	1-9999	3″ Plus Length of Parts 76 mm Plus Length of Parts
	Stroke	19.6″ (Maximum 9 times index)	500 mm (Maximum 9 times index)
	Length	0.394″-177″	10.0-4500 mm
	Number of Input Station	1
	Number of Cut-Off Pieces	1-9999
	Remnant Length	3″ Plus Length of Parts	76 mm Plus Length of Parts
Machine Dimensions (W x L x H)	Head-Up Position	89.5″ x 106.2″ x 95.5″	2274 x 2697 x 2425 mm	89.5″ x 106.2″ x 95.5″ 2274 x 2697 x 2425 mm	89.5″ x 106.2″ x 62.0″ 2274 x 2697 x 1575 mm
Machine Dimensions (W x L x H)	Head Down Position	89.5″ x 106.2″ x 62.0″	2274 x 2697 x 1575 mm
Table Height		32.5″	800 mm	32.5″ 800 mm
Machine Weight		4,851lbs	2,200 kg	4,851lbs 2,200 kg