Infinitely variable through a frequency inverter drive and heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. A read out at the operator’s touch screen assures accurate speed setting.
The hydraulic clamping and combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of + .002 per inch (.051 mm) of cut material. Large anti-vibration rollers help to increase blade life.
Multi length shuttle indexing up to 999". The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy. Repeatability is + .005" per index. The shuttle vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts.
Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut.
Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to 100 jobs. Inputs include Part Length from 0 to 999” (0-25 m) (in inches up to 3 decimal places) and Number of Pieces to be cut.
The front vise jaws are split to reduce the remnant. The split vise jaws also help to reduce burrs left on the material and are ideal for bundle cutting, and holding the workpiece.
The chip auger rotating in the coolant return removes chips quickly and efficiently, freeing the operator to perform more productive operations.
Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material, allowing the piece to be held securely and without distortion.
The NC controller constantly monitors the cutting and blade conditions, including the twist of the saw blade. If these exceed the preset parameters in the automatic blade run-out detector the machine will cease cutting and indicate the reason for stopping.
By simplifying required input data, the cutting rate controller (CNC Light) makes achieving maximum cutting rates, accuracies, and longer blade life a constant.
| Model | HFA560P | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Imperial | Metric | ||||||||||
| Cutting Capacity | Round (Diameter) | 22″ - Minimum Clamp 4.3″ | 560 mm - Minimum Clamp 110mm | 22″ - Minimum Clamp 4.3″ 560 mm - Minimum Clamp 110mm |
22.4″ x 22″ 570 x 560 mm |
7250 lb 3288 kg |
|||||
| Rectangle (W x H) | 22.4″ x 22″ | 570 x 560 mm | |||||||||
| Work Load Capacity | 7250 lb | 3288 kg | |||||||||
| Saw Blade | Blade Size (L x T x W) | 21’8″ x 0.0.63″ x 2″ | 6604 x 1.6 x 54 mm | 21’8″ x 0.0.63″ x 2″ 6604 x 1.6 x 54 mm |
78 – 310 ft/min by Inverter 24-95 m/min by Inverter |
Hydraulic | |||||
| Blade Speed | 78 – 310 ft/min by Inverter | 24-95 m/min by Inverter | |||||||||
| Tension Control | Hydraulic | ||||||||||
| Blade Control | Top Limit Setting | Automatic Setting with Fast Approach Feeler | Automatic Setting with Fast Approach Feeler | Hydraulic Pressure & Flow Control Valve | |||||||
| Cutting Control | Hydraulic Pressure & Flow Control Valve | ||||||||||
| Vise Operation | Type | Front and Rear Vises | Front and Rear Vises | Hydraulic Full stroke cylinder | |||||||
| Control | Hydraulic Full stroke cylinder | ||||||||||
| Motors | Saw Blade | 10 HP | 7.5 kW | 10 HP 7.5 kW |
1/4 HP 0.18 kW |
3 HP 2.2 kW |
|||||
| Cutting Fluid Pump | 1/4 HP | 0.18 kW | |||||||||
| Hydraulic Pump | 3 HP | 2.2 kW | |||||||||
| Power Requirements | Power Supply Voltage | AC230V ± 10%3PH, 60Hz, Required at factory voltage setting | AC230V ± 10%3PH, 60Hz, Required at factory voltage setting | @@ kVA | |||||||
| Cutting Fluid Pump | @@ kVA | ||||||||||
| Pressure Settings | Hydraulic | 427 PSI | 3.0 MPa | ||||||||
| Material Index | Index Mechanism | Shuttle Vise | Shuttle Vise | 16″ 406 mm |
0.39″ – 999″ 10 – 25000 mm |
1-100 | 1-20 | 1-999 | 6.5″ plus length of parts 165 mm plus length of parts |
||
| Stroke | 16″ | 406 mm | |||||||||
| Length | 0.39″ – 999″ | 10 – 25000 mm | |||||||||
| # of Input Block | 1-100 | ||||||||||
| # of Input Station | 1-20 | ||||||||||
| # of Cut-Off Pieces | 1-999 | ||||||||||
| Remnant Length | 6.5″ plus length of parts | 165 mm plus length of parts | |||||||||
| Fluid Capacities | Coolant | 37 gal | 138 liters | 37 gal 138 liters |
30 gal 112 liters |
||||||
| Hydraulic Fluid | 30 gal | 112 liters | |||||||||
| Machine Dimensions(W x L x H) | Head Up Position | 137.2″ x 85,8″ x 91″ | 3485 x 2155 x 2312 mm | 137.2″ x 85,8″ x 91″ 3485 x 2155 x 2312 mm |
137.2″ x 85,8″ x 91″” 3485 x 2155 x 2312 mm |
||||||
| Head Down Position | 137.2″ x 85,8″ x 91″” | 3485 x 2155 x 2312 mm | |||||||||
| Chip Disposal | Chip Conveyor | ||||||||||
| Table Height | 31.5″ | 800 mm | |||||||||
| Table Weight Capacity | 9920 lbs | 4500 kg | |||||||||
