Amada PCSAW330 Automatic Pulse Cutting Bandsawing Machine

Band saws with pulse cutting technology have been designed for economical use under toughest production conditions. For Users who demand the highest demands on cutting performance and quality, based on decades of experience, the optimum approach between tool and machine was developed.

The pulse cutting technology reduces cutting resistance thereby minimizing blade teeth wear and increasing cutting rates. In the case of pulse cutting, continuous pulsation in the feed direction optimises specifically the contact situation of the saw band to allow exceptionally high cutting performance. The pre-defined loading and unloading of the sawteeth results in a considerable reduction of the cutting resistance during sawing. The pulsation moves the saw up and down rapidly, generating a wave-like motion that has a positive effect on the cutting behaviour of the sawteeth, therefore reduces the cutting resistance and guides to increased blade lifetime.

The post-type construction gives higher rigidity than the hinge type. This makes the robust, columnguided AMADA PCSAW 330 particularly interesting for large series.

The introduction of a full cover design prevents scattering of chips and cutting oil to ensure a better work environment.

Environment-friendly SMARTCUT BAND installed as a standard blade helps to increase yield and reduce chips produced. The use of a SMARTCUT 41 mm band saw blade with only 0.9 mm blade thickness specially developed for this machine type, reduces the waste by 25 %, which is particularly advantageous with respect to the efficiency during sawing of expensive materials.