Band saws with pulse cutting technology have been designed for economical use under toughest production conditions. For Users who demand the highest demands on cutting performance and quality, based on decades of experience, the optimum approach between tool and machine was developed.
The pulsation moves the saw up and down rapidly, generating a wave-like motion that has a positive effect on the cutting behaviour of the sawteeth, therefore reduces the cutting resistance and guides to increased blade lifetime.
The pulse cutting technology developed by AMADA has revolutionised band sawing like no other process. Predefined loading and unloading of the band saw blade in the feed direction generates a wave-like up-and-down motion of the saw band that has a positive effect on the sawing process.
The main advantages are:
Basically, it is possible to use either carbide tipped or bimetal bandsaw blades in the metal distribution. The corresponding sawing parameters for more than 200 materials are stored in the CNC controller for both band types. If special materials such as Hastelloy or Inconel are sawed, the AX version is recommended where saw feeding takes place via a precision, servo-electric ball screw drive. In contrast, the PCSAW 530 X model operates with the proven servo-hydraulic AMADA saw feed.
Because of the larger quantities of saw chips resulting from the enormous cutting performance, AMADA paid special attention to perfect chip removal with the PCSAW 530.
On the one side, the a new „3D double wire brush unit“. Two automatically adjusting wire brushes ensure very effective brush-off of the saw chips.
The subsequent, smooth removal of the chips is taken over by an extensively dimensioned scraper conveyor.
The new AMADA solution for manual sawing of small remnants which allows shorter material lengths to be inserted from the front of the machine is particularly interesting for many users.
After entering the desired cutting length into the CNC controller, a robust stopping plate fixed to the feeding vice is positioned to the corresponding cutting length, against which the material to be sawed can be pushed. The otherwise essential and timeconsuming measuring of the material is no longer necessary.
A large number of innovative ideas were realised during conception of the new PCSAW 530 model for maintenance and process monitoring
The two automatically adjusting wire brushes of the new "3D double-brush unit" guarantee thorough brushing of the sawed chips, automatic positioning of the brushes, wear monitoring and wear indication on the screen.
| Model | PCSAW530X | PCSAW530AX | |
|---|---|---|---|
| Cutting Capacity | Round (Diameter) | 1.18″ – 20.87″ 30-530 mm |
|
| Rectangle (W x H) | 20.87″ x 20.87″ 530 x 530 mm |
||
| Work Load Capacity | 10,141 lbs 4,600 kg |
||
| Blade Size (L x T x W) | 22′ 11″ x 0.063″ x 2-5/8″ 7000 x 1.6 x 67 mm |
||
| Blade Speed | 49-394 ft/min, by Inverter 15-120 m/min by Inverter |
||
| Blade Control | Top Limit Setting | Automatic Setting with Quick Approach Feeler | |
| Cutting Control | Windows Based CNC Control, Hydraulic Flow control Valve with Stepping Motor | Windows Based CNC Control, Servo Motor with Ball Screw | |
| Vise Operation | Type | Main Split Vise and Rear Vise | |
| Control | Hydraulic Full-Stroke Cylinder | ||
| Motors | Saw Blade | 20 HP 15 kW |
|
| Hydraulic Pump | 3 HP 2.2 kW |
||
| Pulse Cutting | 1/8 HP 0.09kW |
||
| Wire Brush | 1/2 HP 0.2 kW |
||
| Cutting Fluid Pump | 1/2 HP 0.25 kW |
||
| Power Requirement | Power Supply Voltage | AC220V±10%, 3 PH, 60 HzAll Other Voltages Require Transformer | |
| Power Requirement | 33 kVA | 34 kVA | |
| Cutting Fluid | Tank Capacity | 50.2 gal 190 liters |
|
| Pump Type | Centrifugal Electric | ||
| Pump Capacity | 5.3 gal/min 20 L/min |
||
| Hydraulic | Tank Capacity | 7.34 gal 28 liters |
|
| Pump Type | Piston Pump | ||
| Pressure Setting | 753.8 psi 5.3 MPa (58 kgf/cm2) |
||
| Chip Disposal | Built-in Wide Scraper Style Chip Conveyor | ||
| Material Index | Index Mechanism | Shuttle Vise | |
| Stroke | 19.685″ 500 mm |
||
| Length | 0.394″ – 393.70″ 10-9999.9 mm |
||
| Number of Input Block/Station | 1-99 | ||
| Number of Cut-Off Pieces | 1-9999 | ||
| Remnant Length | 3.94″ Plus Length of Parts 100 mm Plus Length of Parts |
||
| Machine Dimensions (W x L x H) | Head-Up Position | 127.6″ x 83.2″ x 102.9″ 3240 x 2113 x 2613 mm |
127.6″ x 83.2″ x 102.5″ 3240 x 2113 x 2603 mm |
| Head Down Position | 127.6 x 83.2 x 96.9″ 3240 x 2113 x 2460 mm |
127.6″ x 83.2″ x 102.5″ 3240 x 2113 x 2603 mm |
|
| Table Height | 31.5″ 800 mm |
||
| Machine Weight | 12,125 lbs 5500 kg |
||
| Model | PCSAW530X | PCSAW530AX | |||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PCSAW530X | 1.18″ – 20.87″ 30-530 mm |
20.87″ x 20.87″ 530 x 530 mm |
10,141 lbs 4,600 kg |
22′ 11″ x 0.063″ x 2-5/8″ 7000 x 1.6 x 67 mm |
49-394 ft/min, by Inverter 15-120 m/min by Inverter |
Automatic Setting with Quick Approach Feeler | Windows Based CNC Control, Hydraulic Flow control Valve with Stepping Motor | Main Split Vise and Rear Vise | Hydraulic Full-Stroke Cylinder | 20 HP 15 kW |
3 HP 2.2 kW |
1/8 HP 0.09kW |
1/2 HP 0.2 kW |
1/2 HP 0.25 kW |
AC220V±10%, 3 PH, 60 HzAll Other Voltages Require Transformer | 33 kVA | 50.2 gal 190 liters |
Centrifugal Electric | 5.3 gal/min 20 L/min |
7.34 gal 28 liters |
Piston Pump | 753.8 psi 5.3 MPa (58 kgf/cm2) |
Built-in Wide Scraper Style Chip Conveyor | Shuttle Vise | 19.685″ 500 mm |
0.394″ – 393.70″ 10-9999.9 mm |
1-99 | 1-9999 | 3.94″ Plus Length of Parts 100 mm Plus Length of Parts |
127.6″ x 83.2″ x 102.9″ 3240 x 2113 x 2613 mm |
127.6 x 83.2 x 96.9″ 3240 x 2113 x 2460 mm |
31.5″ 800 mm |
12,125 lbs 5500 kg |
| PCSAW530AX | 1.18″ – 20.87″ 30-530 mm |
20.87″ x 20.87″ 530 x 530 mm |
10,141 lbs 4,600 kg |
22′ 11″ x 0.063″ x 2-5/8″ 7000 x 1.6 x 67 mm |
49-394 ft/min, by Inverter 15-120 m/min by Inverter |
Automatic Setting with Quick Approach Feeler | Windows Based CNC Control, Servo Motor with Ball Screw | Main Split Vise and Rear Vise | Hydraulic Full-Stroke Cylinder | 20 HP 15 kW |
3 HP 2.2 kW |
1/8 HP 0.09kW |
1/2 HP 0.2 kW |
1/2 HP 0.25 kW |
AC220V±10%, 3 PH, 60 HzAll Other Voltages Require Transformer | 34 kVA | 50.2 gal 190 liters |
Centrifugal Electric | 5.3 gal/min 20 L/min |
7.34 gal 28 liters |
Piston Pump | 753.8 psi 5.3 MPa (58 kgf/cm2) |
Built-in Wide Scraper Style Chip Conveyor | Shuttle Vise | 19.685″ 500 mm |
0.394″ – 393.70″ 10-9999.9 mm |
1-99 | 1-9999 | 3.94″ Plus Length of Parts 100 mm Plus Length of Parts |
127.6″ x 83.2″ x 102.5″ 3240 x 2113 x 2603 mm |
127.6″ x 83.2″ x 102.5″ 3240 x 2113 x 2603 mm |
31.5″ 800 mm |
12,125 lbs 5500 kg |
