| Modèle | J-6500H | J-5500H | J-4500H | J-3500H |
|---|---|---|---|---|
| Dimensions de la machine (L x W x H) | 12,000x3,100x3,100mm | 11,000x3,100x3,100mm | 10,000X3,100X3,100mm | 9,000x3,100x3,100mm |
| T-Slot | 6,500x450mm | 5,500x450mm | 4,500X450mm | 3,500x450mm |
For machining short work pieces, the operator may mount the work pieces on the table to machine simultaneously.
This machine is excellent for machining extra-long work pieces with only one setup. Suitable machining includes milling, drilling and tapping. With such machining nodes, you can save considerable time.
With this mode of machining, greater efficiency can be obtained.
The machine is equipped with a PC-based CNC control as standard equipment. It is easy to learn and operate. Upon request Mitsubishi / Fanuc or Siemens CNC control is available (optional).
The ARM type magazine rotation is driven by a cylindrical cam for fast and dependable is 24 tools. Random tool selection provides highly efficient tool changing.
The Z-axis movement is balanced by an air cylinder, allow the Z-axis to move more smoothly. The pneumatic balance system is equipped with and accumulator to supply stable air flow at all times.
The machine is equipped with an oil mist cooling system for efficient cooling of cutting tool and work piece. It not only extends the service life of the tool, but also ensures superior cutting quality.
After each machine has been assembled, our experienced personnel applies a Laser interferometer to inspect and calibrate ball screw pitch error and backlash, positioning accuracy, as well as repeatability on the X, Y and Z-axes. Through the laser inspection process, we can guarantee high feed accuracy on three axes as well as overall machining accuracy.
To assure the highest structural mechanical assembly accuracy, and to eliminate the reverse spike phenomenon, all Bar tested during the assembly processes. The test will calibrate the machine to the optimum status, thus extend the life time of axial ball screw and slide ways.
The X-axis movement is driven by a servo motor and transmitted through high precision ball screw with gear reducer. This special design not only produces powerful driving force, but also provides high positioning accuracy on the X-axis.
The X-axis is transmitted through a ø80 mm extra-large ball screw, which is supported by two blocks to improve self-deflection of the screw. This help upgrade positioning accuracy on the X-axis.
| Model | J-CNC6500H |
|---|---|
| X-Axis Stroke | 6,500 mm (Opt.3,500 mm / 4,500 mm / 5,500 mm) |
| Y-Axis Stroke | 510 mm (Opt.650 mm) |
| Z-Axis Stroke | 510 mm (Opt. 700 mm) |
| Distance From Spindle Nose To Table Surface | Min. 160 mm, Max. 670 mm |
| Table Type | 5 Groove T-slots Table |
| Table Size | 450 x 6,500 mm (Opt. 600 x 6500,For Y-Axis stroke 650 mm) |
| Max. Load | 1,000 kg |
| T-Slots(No. x W x P) | 5 x 94 x 450 mm |
| Spindle Speed | 12,000 |
| Spindle Motor | 15 HP (11 kw) |
| Spindle Taper Cone | BT40 (Opt. BT50 / 8,000 R.P.M.) |
| Rapid Feed Rate(X / Y / Z) | Gear rack X:40 m/min / (Opt. Ball screw X:24 m/min) Ball screw Y:24 m/min, Ball screw Z:24 m/min |
| Servo Motors of 3 Axes | X:5 kw, Y:3.5 kw, Z:3.5 kw |
| Cutting-Feed Rate | F : 1 ~ 5,000 mm/min |
| Repeatability Accuracy | X: ± 0.02 mm, Y: ± 0.01 mm, Z:± 0.01 mm |
| ATC Magazine Capacity | 24 Tools |
| ATC Type | Arm-type |
| ATC Tool Holder | BT40 |
| ATC Pull Stud | 45° |
| ATC Max. Tool Length | 300 mm |
| ATC Max. Tool Diameter | 80 mm |
| ATC Max. Tool Weight | 7 kg |
| Required Pneumatic Pressure | 6 kg/cm2 |
| Machine Dimensions (L x W x H) | 15,000 x 3,200 x 3,000 mm |
| Packing Dimensions(L x W x H) | 11,800 x 2,300 x 2,500 mm (2 40-inch containers) |
| Machine Weight | 15,000 - 21,000 kgs |
