Three axes are equipped with high precision linear guide ways.
| Model | J-6500E | J-3500E |
|---|---|---|
| Machine Dimensions (L x W x H) | 8,900 x 1,600 x 2,300 mm | 5,900 x 1,600 x 2,300 mm |
| Table | 6,500 x 300 mm | 3,500 x 300 mm |
For machining short work pieces, the operator may mount the work pieces on the table to machine simultaneously.
This machine is excellent for machining extra-long work pieces with only one setup. Suitable machining includes milling, drilling and tapping. With such machining nodes, you can save considerable time.
With this mode of machining, greater efficiency can be obtained.
After each machine has been assembled, our experienced personnel applies a Laser interferometer to inspect and calibrate ball screw pitch error and backlash, positioning accuracy, as well as repeatability on the X, Y and Z-axes. Through the laser inspection process, we can guarantee high feed accuracy on three axes as well as overall machining accuracy.
To assure the highest structural mechanical assembly accuracy, and to eliminate the reverse spike phenomenon, all Bar tested during the assembly processes. The test will calibrate the machine to the optimum status, thus extend the life time of axial ball screw and slide ways.
Machines are equipped with Syntec PC-Base CNC controller, featuring easy to learn and easy to operate. Mitsubishi, Fanuc or Siemens controller is optional.
| Model | J-CNC 6500 E |
|---|---|
| X-Axis Stroke | 3,500 / 4,500 / 5,500 / 6,500 mm (Opt.) |
| Y-Axis Stroke | 300 mm |
| Z-Axis Stroke | 200 mm |
| Distance from spindle nose to table surface | Min. 150 mm, Max. 350 mm |
| Table Type | vise (1set /per meter) |
| Table Size | 300 x (3,500 ~ 6,500) mm |
| T-Slot(NO. x Pitch x Size) | 850 mm |
| Spindle Speed | 18,000 R.P.M. |
| Spindle Motor | 10HP (7.5 kw) |
| Spindle Taper Cone | ISO 30 |
| Rapid feed rate (X/Y/Z) | X:60 m/min, Y:24 m/min, Z:24 m/min |
| Servo Motors 3 Axes | X: 1.3kw, Y: 1.3kw, Z: 1.3kw |
| Cutting Feed Rate | F:1 ~ 5,000 mm/min |
| Repeatability Accuracy | X: ±0.03 mm, Y: ±0.02 mm, Z: ±0.02 mm |
| Magazine Capacity | 8 Tools |
| Tood Holder | ISO 30 |
| Max. Tool Diameter | 50 mm |
| Required Pneumatic Pressure | 6 kgs/cm2 |
| Machine Dimensions | 5,400 ~ 8,900 x 1,600 x 2,300 mm |
| Packing Dimensions | 5,600 ~ 9,100 x 1,700 x 2,300 mm |
| Machine Weight | 3,500 ~ 5,500 kgs |
